Download
Share
Print this page
Synology RT2600ac Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Synology Manuals
  4. Network Router
  5. RT2600ac
  6. Hardware installation manual
Synology RT2600ac Hardware Installation Manual

Synology RT2600ac Hardware Installation Manual

Hide thumbs Also See for RT2600ac:

Advertisement

Quick Links

Download this manual
User Manual of Product 1:
Kidde Carbon Monoxide Detector, Plug In Wall with 9-Volt
Battery Backup, Digital LED Display, 2 Pack
User Manual of Product 2:
Kidde Smoke Detector, 9-Volt Battery Operated, Ionization
Smoke Alarm, Battery Included

Advertisement

loading
Need help?

Need help?

Do you have a question about the RT2600ac and is the answer not in the manual?

Questions and answers

Related Manuals for Synology RT2600ac

Summary of Contents for Synology RT2600ac

  • Page 1 User Manual of Product 1: Kidde Carbon Monoxide Detector, Plug In Wall with 9-Volt Battery Backup, Digital LED Display, 2 Pack User Manual of Product 2: Kidde Smoke Detector, 9-Volt Battery Operated, Ionization Smoke Alarm, Battery Included...
  • Page 2 Synology Router RT2600ac Hardware Installation Guide...
  • Page 3 Table of Contents Chapter 1: Meet Your Synology Router Package Contents RT2600ac at a Glance Safety Instructions Chapter 2: Set up Your Synology Router Install Antennas Position Your RT2600ac Connect to Your RT2600ac Set up Synology Router Manager (SRM) Appendix A: Specifications...
  • Page 4 Meet Your Synology Router Thank you for purchasing this Synology product! Before setting up your new RT2600ac, please check the package contents to verify that you have received all of the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your RT2600ac.
  • Page 5 Description Antenna Base Install the included antennas here. Power Button Press to power on/off the Synology Router. Power Port Connect the AC power adapter here. Press and hold for four seconds (Soft Reset) or for ten seconds (Hard RESET Button Rear Panel Reset).
  • Page 6 To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately. 5 Chapter 1: Meet Your Synology Router...
  • Page 7 2 Turn clockwise until the antenna is secured. 3 Repeat Steps 1 and 2 to install the other antennas. For optimal Wi-Fi performance, tilt the antennas so that they are at a 90 degree angle to the surface. 6 Chapter 2: Set up Your Synology Router...
  • Page 8 Note: If you wish to use Smart WAN, connect your RT2600ac (at the WAN1 and LAN1 ports) to the ISP modem with network cables. The remaining LAN ports will be available for wired devices. 7 Chapter 2: Set up Your Synology Router...
  • Page 9 2 Connect wireless client devices to your RT2600ac. When the 2.4G/5G LED indicators have turned static green, RT2600ac is ready to connect with other devices. Use your wireless device to scan and join the Wi-Fi network created by your RT2600ac.
  • Page 10 Set up Synology Router Manager (SRM) 1 Use a computer or wireless device connected to your RT2600ac's local network. If you use a wireless device, scan and join the Wi-Fi network (SSID: Synology_(Serial); Password: synology). 2 Open a web browser, and enter either URL into the address bar: http://router.synology.com...
  • Page 11 • Manual IP: Choose this option if you have obtained an available IP address for use. • Auto IP: Choose this option if you rely on an ISP modem for automatic IP assignment. 10 Chapter 2: Set up Your Synology Router...
  • Page 12 8 The wizard will continue to set up your RT2600ac, and it may take up to three minutes to complete the setup. 9 After the setup is complete, click Start managing now to enjoy SRM and its various features. Note: 1.
  • Page 13 Appendix Specifications Item RT2600ac • USB 3.0 x 1 External Ports • USB 2.0 x 1 • SD x 1 WAN Port Gigabit WAN x 1 or Gigabit WAN x 2 (Dual WAN) LAN Ports Gigabit LAN x 4 or Gigabit LAN x 3 (Dual WAN)
  • Page 14 Model specifications are subject to change without notice. Please refer to for the latest information. The USB/SD LED does not reflect the status of the 3G/4G dongle or printer attached to your Synology Router 13 Appendix B: LED Indicator Table...
  • Page 15 限用物質含有情況標示聲明書 Declaration of the Presence Condition of the Restricted Substances Marking 設備名稱：802.11ac 無線路由器，型號（型式）：RT2600ac Equipment name Type designation (Type) 限用物質及其化學符號 Restricted substances and its chemical symbols 六價鉻 多溴聯苯 多溴二苯醚 單元 汞 鎘 Ｕnit Lead 鉛 Hexavalent Polybrominated Polybrominated Mercury Cadmium (Pb)
  • Page 16 Section 5. License Limitations. The license set forth in Sections 1, 2 and 3 applies only to the extent that you have ordered and paid for the Product and states the entirety of your rights with respect to the Software. Synology reserves all rights not expressly granted to you in this EULA.
  • Page 17 Arbitration Law and related enforcement rules of the country in which Synology Inc. was organized. In such cases, the arbitration will be limited solely to the dispute between you and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis.
  • Page 18 Section 3. Limited Warranty and Remedies 3.1 Limited Warranty. Subject to Section 3.6, Synology warrants to the Customer that each Product (a) will be free of material defects in workmanship and (b) under normal use will perform substantially in accordance with Synology's published specifications for the Product during the Warranty Period.
  • Page 19 Section 4. Limitations of Liability 4.1 Force Majeure. Synology will not be liable for, or be considered to be in breach of or default under this Warranty on account of, any delay or failure to perform as required by this Warranty as a result of any cause or condition beyond its reasonable control (including, without limitation, any act or failure to act by Customer).
  • Page 20 Arbitration Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between Customer and Synology. The arbitration, or any portion of it, will not be consolidated with any other arbitration and will not be conducted on a class-wide or class action basis. The arbitration shall be held in King County, Washington, U.S.A.
  • Page 21 5.9 Entire Agreement. This Warranty constitutes the entire agreement, and supersedes any and all prior agreements, between Synology and Customer related to the subject matter hereof. No amendment, modification or waiver of any of the provisions of this Warranty will be valid unless set forth in a written instrument signed by the party to be bound thereby.
  • Page 22 FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 23 この装置は、クラス B 機器です。この装置は、住宅環境で使用することを 目的 としていますが、この装置がラジオやテレビジョン受信機に近接して使 用され ると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。 VCCI 一 B...
  • Page 25 Statement Declaration of Conformity for the Radio Equipment Directive 2014/53/EU Hereby, Synology Inc. declares that this Wireless Router is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.synology.com/support/download/RT2600ac...
  • Page 26 Mindestabstand von 20 cm zwischen dem Strahlengerät und Ihrem Körper installiert und betrieben werden. Δήλωση Συμμόρφωσης με την Οδηγία για τον Ραδιοεξοπλισμό 2014/53/ΕΕ Με το παρόν η Synology Inc. δηλώνει ότι ο παρών Ασύρματος Δρομολογητής συμμορφώνεται με τις ουσιώδεις απαιτήσεις και τις λοιπές σχετικές διατάξεις της Οδηγίας 2014/53/ΕΕ.
  • Page 27 Déclaration de conformité pour la directive sur les équipements radioélectriques 2014/53/UE Par la présente, Synology Inc. déclare que ce routeur sans fil est conforme aux exigences essentielles et autres dispositions connexes de la directive 2014/53/UE.
  • Page 28 Dichiarazione di conformità alla Direttiva RED (Radio Equipment Directive) 2014/53/UE Synology Inc. dichiara che il router wireless soddisfa i requisiti essenziali e le altre disposizioni rilevanti della Direttiva 2014/53/UE. Il testo completo della dichiarazione UE di conformità è disponibile al seguente indirizzo Internet: https://www.synology.com/support/download/RT2600ac...
  • Page 29 Declaração de conformidade para a Diretiva 2014/53/UE relativa aos equipamentos de rádio Por este meio, a Synology Inc. declara que o Router Sem Fios está em conformidade com os requisitos essenciais e outras disposições relevantes da Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de Internet:...
  • Page 30 Försäkran om överensstämmelse med direktivet för radioutrustning 2014/53/EG Synology Inc. Försäkrar härmed att den här trådlösa routern överensstämmer med de grundläggande kraven och andra gällande bestämmelser för direktivet 2014/53/EG. Den fullständiga texten för EG-försäkran om överensstämmelse finns tillgänglig på följande internetadress: https://www.synology.com/support/download/RT2600ac...
  • Page 31 ® ® SURFboard SB8200 DOCSIS 3.1 Cable Modem User Guide, STANDARD Revision x.4 P/N 365-095-30000...
  • Page 32 CommScope copyrights and trademarks © 2021 CommScope, Inc. All rights reserved. No part of this content may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from CommScope, Inc.
  • Page 33 Safety and regulatory information Read all safety and regulatory information before installing your device and setting up your home network connection. Important safety instructions Read this before you begin — When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: ■...
  • Page 34 ■ Do not connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully inserted with no part of the blades exposed. ■ Place this device on a stable surface. ■ Avoid damaging the device with static by touching the coaxial cable when it is attached to the earth-grounded coaxial cable-TV wall outlet.
  • Page 35 FCC statements FCC Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 36 Caring for the environment by recycling your ARRIS equipment Please do not dispose of this product with your residential or commercial waste. Contact your local authorities for information about practices established for your region. If collection systems are not available, call ARRIS Technical Support at 1-877-466-8646 for assistance.
  • Page 37 Table of contents Chapter 1: Getting started................. 8 In the box........................8 Additional items needed (not included)................. 9 System requirements...................... 9 Contact information......................9 Chapter 2: Product overview..............10 Front panel........................10 Rear panel........................11 Cable modem label....................... 12 Chapter 3: Installing the cable modem............ 13 Connect the SB8200 to your computer................
  • Page 38 Chapter 1 Getting started ® The ARRIS SURFboard SB8200 DOCSIS 3.1 Cable Modem provides significantly higher downstream (send) and upstream (receive) Internet connection speeds over the broadband connection on your home or small business network. You use your SB8200 to directly connect a computer or router to your LAN through an Ethernet connection.
  • Page 39 Chapter 1: Getting started Item Description SB8200 Quick Start Provides basic instructions for installing the cable Guide modem and setting up your network connection Additional items needed (not included) The following item is not included in the box and must be purchased separately, if needed. ■...
  • Page 40 Chapter 2 Product overview Front panel SB8200 front view SB8200 front panel LED icons LED Icon Flashing Not applicable — icon does not Green: Power is properly connected. flash. Scanning for a downstream Green: Downstream channel is connected in (receive) channel Internet DOCSIS 3.0 mode.
  • Page 41 Chapter 2: Product overview LED Icon Flashing *Blue: Indicates DOCSIS 3.1 operation (high-speed Internet access) which may not be available in all locations. Check with your service provider for availability in your area. Rear panel SB8200 rear view SB8200 rear panel ports and connectors Port Name Description Two Ethernet ports for RJ-45 network cable connections...
  • Page 42 Chapter 2: Product overview Port Name Description 2. Press and hold the indented Reset button for 10 seconds or until the front panel LEDs flash. 3. Remove the paper clip or small object from the Reset opening. Reset the Cable Modem Configuration Settings (page 24) for more information on restoring the factory default settings on your SB8200.
  • Page 43 Chapter 3 Installing the cable modem CAUTION: This product is for indoor use only. Do not route the Ethernet cable(s) outside of the building. Exposure of the cables to lightning could create a safety hazard and damage the product. You can set up your modem in one of the following ways. ■...
  • Page 44 Chapter 3: Installing the cable modem 2. Connect the other end of the coaxial cable to the Cable connector on the rear of your SB8200. Use your hand to tighten the connectors to avoid damaging them. 3. Connect one end of an Ethernet cable to the Ethernet port on the rear of your SB8200 and the other end to the Ethernet port on your computer.
  • Page 45 Chapter 4 Using the Web Manager The SB8200 Web Manager is available to view and monitor the SB8200 operational status and network configuration settings. Start your SB8200 Web Manager 1. Open any Web browser on the computer connected to your SB8200. 2.
  • Page 46 Chapter 4: Using the Web Manager SB8200 status screen Note: If you cannot access the HTML pages in the SB8200 Web Manager, please contact ARRIS Technical Support (page 9) for assistance. Note: When logging in to the SB8200 Web Manager, you will be prompted to change the default login password (password).
  • Page 47 Chapter 4: Using the Web Manager SB8200 Web Manager menu buttons ■ The SB8200 menu links are displayed along the bottom of the SB8200 Web Manager screen. To display a specific Web Manager screen, click the menu link. SB8200 Web Manager screen options Screen Option Function Status...
  • Page 48 Chapter 4: Using the Web Manager SB8200 help pages screen Exit the Web Manager To exit the Web Manager: ■ Click Logout in the upper right corner of the web browser window. SURFboard ® SB8200 DOCSIS ® 3.1 Cable Modem User Guide STANDARD Revision x.4...
  • Page 49 Chapter 5 Monitoring your cable modem and protecting your connected network Note: You may notice that some of the SB8200 Web Manager configuration settings may be blocked and cannot be modified. This may be due to some restrictions set up by your service provider for security reasons and also to prevent unauthorized modifications to certain cable modem configuration parameters.
  • Page 50 Chapter 5: Monitoring your cable modem and protecting your connected network 2. Enter the default username in the Enter Username field. admin 3. Enter the current (default) password in the Enter Current Password field. password 4. Enter your new password in the Enter New Password field. 5.
  • Page 51 Chapter 5: Monitoring your cable modem and protecting your connected network View the cable modem network connection status The SB8200 Status screen displays the current connection status of your SB8200 and the downstream and upstream bonded channel connections for receive and send data transmissions.
  • Page 52 Chapter 5: Monitoring your cable modem and protecting your connected network SB8200 Status Screen (2 of 2) View the cable modem event log The SB8200 generates a running log of the time and events or activities that it detects during the cable modem operation.
  • Page 53 Chapter 5: Monitoring your cable modem and protecting your connected network View the Cable Modem Configuration Settings The SB8200 Cable Modem Configuration screen displays the downstream and upstream connection to the network. When your SB8200 successfully connects to the network, it stores the connection frequency to automatically connect whenever you have to log in to your SB8200.
  • Page 54 Chapter 5: Monitoring your cable modem and protecting your connected network 2. To enable Link Aggregation Configuration, click Enable LAG checkbox. 3. Click Apply/Save. Reset the cable modem configuration settings You can restore the factory default configuration settings on your SB8200. This process will delete the current SB8200 configuration settings and take approximately five to 30 minutes to complete.
  • Page 55 Chapter 6 Troubleshooting tips If the solutions listed in the Troubleshooting Solutions table below do not solve your problem, please contact your service provider for assistance. Your service provider may ask for the status of the SB8200 front panel LEDs (see Front panel LED icons and error conditions (page 26)Front Panel LED Icons and Error Conditions) for more information).
  • Page 56 Chapter 6: Troubleshooting tips Modem Problem Possible Solution Check that the Power and Online LED icons on the front panel are lit up solid. Contact your service provider for assistance. Front panel LED icons and error conditions The SB8200 front panel LED icons provide status information for the following error conditions: Front panel LED icons and error conditions LED Icon...
  • Page 57 Warranty Information CommScope, Inc. ("ARRIS") Retail Purchasers If you purchased this Product directly from ARRIS or from an authorized ARRIS retail reseller, ARRIS warrants to you, the original end user customer, that (A) the Product, excluding Software, will be free from defects in materials and workmanship under normal use, and (B) with respect to Software, (i) the media on which the Software is provided will be free from defects in material and workmanship under normal use, and (ii) the Software will perform substantially as described in its documentation.
  • Page 58 INFRINGEMENT PROVIDED IN THE UNIFORM COMMERCIAL CODE. Some states do not allow for the exclusion of implied warranties, so the above exclusion may not apply to you. What additional provisions should I be aware of? Because it is impossible for ARRIS to know the purposes for which you acquired this Product or the uses to which you will put this Product, you assume full responsibility for the selection of the Product for its installation and use.
  • Page 60 Corporate Headquarters CommScope · Hickory · North Carolina · 28602 · USA T: 1-828-324-2200 www.commscope.com...