1. Manuals
  2. Brands
  3. NTT docomo Manuals
  4. Cell Phone
  5. STYLE Series
  6. Instruction manual

NTT docomo STYLE Series Instruction Manual

'10.5
Hide thumbs Also See for STYLE Series:
Table of Contents

Advertisement

Quick Links

Download this manual
'10.5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STYLE Series and is the answer not in the manual?

Questions and answers

Related Manuals for NTT docomo STYLE Series

Summary of Contents for NTT docomo STYLE Series

  • Page 1 ’10.5...

  • Page 2: Basic Package

    DOCOMO W-CDMA System Basic package Thank you for purchasing “docomo STYLE series SH-08B”. Before use of SH-08B, make sure that you read this manual to ensure proper operation. Explanation for operation of SH-08B Battery Desktop Holder SH32 Other than this manual, “Support Book” (contained in the Pack SH23 FOMA terminal) or “Manual (detailed edition)”...

  • Page 3: Basic Operation

    I n t r o d u c t i o n Introduction FOMA Terminal nP.2 What You Can Do with SH-08B nP.3 Part Names and Functions nP.4 Precautions nP.6 Handling Precautions nP.13 Waterproofness/Dust-proofness nP.16 Basic Before Use nP.22 Screen Explanation nP.26 Character Entry nP.31 Operation Sound/Screen Setting nP.33...

  • Page 4: Foma Terminal

    FOMA Terminal Because the FOMA terminal relies on radio signals, it cannot be The user hereby agrees that the user shall be solely responsible for used in places with no signal (such as tunnels, underground, or in the result of the use of SSL/TLS. Neither DOCOMO nor the certifier buildings), in places with a weak signal or outside the FOMA as listed herein makes any representation and warranty as for the security in the use of SSL/TLS.
  • Page 5 What You Can Do with SH-08B AUTO-GPS (in Japanese only) nP.58 International roaming nP.47 By the AUTO-GPS function, you can receive convenient The same FOMA terminal, phone number and mail services, such as providing surrounding information address as those used in Japan are available overseas including weather information, store information, etc., or (supporting only 3G area).

  • Page 6: Part Names And Functions

    Part Names and Functions Using earphone Connection example for flat-plug earphone/ microphone with switch (sold separately) When you use an earphone which does not support external Connector connector terminal, connect with a plug adapter (sold separately). Flat-plug connector of The design differs depending on the handset flat-plug earphone/ color.
  • Page 7 1Earpiece n&: Side key 2Air vent Display the sub display or activate the function set in Side key This is a vent for taking any remaining air out of the FOMA shortcut with the FOMA terminal closed. oPicture Light terminal. 3Main display (nP.26) Illuminates while shooting.

  • Page 8: Table Of Contents

    Precautions Before use, read these “Precautions” carefully and use your FOMA The following symbols indicate specific directions. terminal properly. Keep this manual in a safe place for future reference. Indicates a prohibited action. These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times.

  • Page 9: Danger

    Handling the FOMA terminal, Use only the battery packs and If you notice anything unusual, adapters specified by NTT such as an unusual odor, battery pack, adapters, desktop DOCOMO for use with the overheating, discoloration or holder, and UIM (general) FOMA terminal.

  • Page 10: Handling The Foma Terminal

    Be very careful when using the Do not point the illuminated Do not shine the light at anyone FOMA terminal connected to light directly at someone’s driving a car or other vehicles. adapters repeatedly or for long eyes. periods of time. Do not use Picture Light near people’s faces.

  • Page 11: Handling Battery Pack

    If you are using electronic If you use the FOMA terminal in an Caution medical equipment, contact the automobile, contact the automobile respective manufacturer or manufacturer or vendor to check Do not swing the FOMA vendor to check whether the whether the operation of the terminal by its strap, etc.

  • Page 12: Handling Adapters And Desktop Holder

    If the battery fluid leaks, do not Danger Warning get the liquid on your skin (face, hands, etc.). Do not touch terminals with If any trouble such as a May result in loss of eyesight and harm to your metallic objects such as wires. deformation or scratches skin.

  • Page 13: Handling Uim

    Take care not to short-circuit the If the fuse in the DC adapter Handling UIM charging terminal when connected blows, always replace it with a to an outlet or cigarette lighter fuse of the specified type. Caution socket. Also, take care not to allow May cause fires, burns or electric shock.

  • Page 14: Material List

    Where a medical facility has specific instructions Material list Material/Surface PART prohibiting the carrying and use of mobile treatment phones, observe those instructions strictly. External Material/Surface If auto power on function is set to on, disable this PART connector SUS/Nickel plating treatment function before turning off your mobile phone.

  • Page 15: Handling Precautions

    Handling Precautions • Never use chemicals such as alcohol, Do not rub or scratch the display with General notes thinners, benzene or detergents, as these metal, etc. agents may erase the printing on the May scratch the handset and cause SH-08B is waterproof/dust-proof, however, handset or cause discoloration.
  • Page 16 When connecting an external connector Never place magnetized items near the Notes about adapters device to the external connector terminal FOMA terminal. (earphone/microphone terminal), do not Putting highly magnetized items closer may Charge battery in areas where ambient put it in obliquely or do not pull it while it cause an error.

  • Page 17: Felica Reader/Writer

    Notes about UIM FeliCa reader/writer Caution Do not apply unnecessary force when The FeliCa reader/writer function in the Never use the FOMA terminal that is inserting/removing the UIM. FOMA terminal uses weak electric waves modified. Using a modified device violates Customer is responsible for malfunctions in the handling of which does not require a the Radio Law.
  • Page 18 Waterproofness/Dust-proofness SH-08B is waterproof to IPX5 (former JIS protection code You can rinse off dirt from the FOMA terminal. Wash the FOMA terminal with low-pressure water flow (6 liters/min or lower and tap and IPX7 (former JIS protection code 7) standards, water at room temperature (between 5°C and 35°C)), holding it and dust-proof to IP5X (JIS protection code 5)
  • Page 19 Opening external connector terminal cover Hook a finger on the slot to open. Slot Closing external connector terminal cover Back cover Push and close securely in the direction of the arrow so that gaps are not left between the FOMA terminal and the external connector terminal cover.
  • Page 20 Removing back cover Precautions Slide the back cover lever to unlock (1), When your hands or the FOMA terminal are wet, do not attach/ remove the back cover or open/close the external connector hook a nail on the slot and remove the terminal cover.
  • Page 21 Do not wash the FOMA terminal in a washing machine, etc. To prevent condensation, do not bring the FOMA terminal from a cold place to a bathroom, etc. without letting the FOMA terminal cool to room temperature. Do not expose the FOMA terminal to extreme humidity for long periods.

  • Page 22: Draining Water When The Foma Terminal Gets Wet

    Shake the FOMA terminal approximately Draining water when the FOMA 20 times, securely holding its hinge terminal gets wet section, until there is no more water splattering When the FOMA terminal is wet, water may flow out after wiping it off. Drain the water following the steps below. Wipe the FOMA terminal surface with dry and clean cloth, etc.
  • Page 23 Softly press dry and clean cloth, etc. Charging against the FOMA terminal to wipe off Accessories and optional parts are not waterproof/ water remaining in the mouthpiece, dust-proof. Check the followings before and after earpiece, speaker, keys, air vent or hinges charging.

  • Page 24: Before Use

    Before Use Basic Operation Inserting UIM (FOMA card) and Turn a recycle mark battery pack side up, match tabs and attach the battery pack A UIM is an IC card that records personal information, such as phone numbers, etc. The FOMA terminal does not support the UIM (blue). Change the Tabs UIM (blue) at a docomo Shop.
  • Page 25 Charging It is recommended that the accompanying desktop holder be used Connector (Turn the for charging to prevent water from seeping or dust from getting in side with the arrows up) caused by forgetting to close the external connector terminal cover. Charging LED The AC adapter and desktop holder are not waterproof/dust-proof.
  • Page 26 Hold the release buttons (1) and Charging by using AC adapter horizontally remove the connector (2) Read the user’s guide of FOMA AC Adapter 01/02 (sold when charging is complete separately). Charge end sound is heard and charging LED turns off when Open the external connector terminal cover and charging is complete.

  • Page 27: Turning Power On

    Turning power on Checking your own phone number H (for at least 2 seconds) Stand-by display appears when initial settings are complete. Press H for at least 2 seconds to turn the power off. Saving your own name and image Changing screen display to English ]0/C &...

  • Page 28: Screen Explanation

    Screen Explanation Viewing display/icon Silent Vibrator Icon display area Manner mode Public mode (Drive mode) IC card lock Restriction Main icons Hands-free Signal status Alarm b b b (Strong b Weak) When [ ] appears, the handset is outside the Music&Video Channel program reservation service area or in a place with no signal.
  • Page 29 Checking stock icon details Displaying and operating i-Widget Stock icons appear in the stand-by display when a call is missed or a In the i-Widget screen, you can simultaneously activate multiple new mail is received. Widget Appli and display them as a list. For details on operation of i-Widget nP.68 Number of entries Message...

  • Page 30: Viewing Main Menu

    Viewing main menu Set, change or register functions from the menu screens. You can select the icon displayed on the menu to retrieve the function. Functions and designs of the custom menu differ depending on the Kisekae tool set. & Stand-by display Custom menu Basic menu...

  • Page 31: Key Operation

    Key operation Multi-guide key and operation guidance key Use to select or execute the menus displayed in the operation guidance. & & & Clear key End key Main menu displayed in the operation guidance Use to return to the previous Use to end the function being screen.

  • Page 32: Menu Operation

    Menu operation Selecting a function from submenu When [Submenu] appears in the operation guidance, functions For details on the available functions nP.84 (submenu) that can be used in the screen appear by pressing C. The operation may differ from the description in this manual &...

  • Page 33: Entering Characters

    Character Entry Entering characters Entering characters The explanations in this manual are based on method for entering Example: When entering “電話” characters in 5-touch entry method. In the character entry Switching entry modes screen, enter “でんわ” でんわ: 4 (four times)/* Switch entry modes to enter various types of characters.
  • Page 34 Entering pictograms/symbols Copying characters In the character entry screen, i In the character entry screen, move the To switch between pictograms and Deco-mail pictograms: i cursor to the start position/C/ To switch between single- and double-byte symbols: C & [Copy]/t &...

  • Page 35: Setting Keypad Sound Off

    Sound/Screen Setting Changing ring tone Setting vibrator ][SETTINGS]/[Snd/Vibrator/ You can set the vibrator to notify you of incoming calls, mails, alarms and GPS function. Manner]/[Select sound] ][SETTINGS]/[Snd/Vibrator/ & Select an item/t Manner]/[Vibrator] Select a ring tone/i & Select an item/t Adjusting ring tone volume &...

  • Page 36: Using Manner Mode

    Using manner mode Changing screen setting You can set the FOMA terminal on mute. Changing main display Camera shutter sound and record start/end sound are heard even ][SETTINGS]/[Disp/LED/Power while the manner mode is set. saver]/[Stand-by settings]/[Stand-by ^# (for at least 1 second) display] ;...

  • Page 37: Setting Machi-Chara

    Preventing others from seeing display Setting Machi-chara clearly You can display a character in the stand-by display. ][SETTINGS]/[Disp/LED/Power If you set VeilView, you can prevent others from seeing your display by displaying patterns. saver]/[Color/Graphic set]/ $ (for at least 1 second) [Machi-chara]/[ON] ;...

  • Page 38: Saving Power Consumption

    Changing LED for incoming calls Saving power consumption ][SETTINGS]/[Disp/LED/Power Norm (auto bright) This is normal light setting. Brightness is saver]/[LED settings]/[Called LED] automatically adjusted. Norm (fixed bright) This is normal light setting. Brightness is fixed. & Select an item/t eco mode You can save power consumption.

  • Page 39: Adjusting Display Brightness

    Changing original eco mode setting Adjusting display brightness Adjusting methods are as follows. Setting light time of display and keypad Automatic The display brightness is automatically adjusted according to the surrounding light. You can set the length of light time for each function when the FOMA terminal is not in use for a set length of time.

  • Page 40: Various Security Codes

    Lock/Security Various security codes Terminal security code (for various functions) Some functions for convenient use of the FOMA terminal require security codes. [0000] is set by default but you can change the code. Precautions for various security codes If you enter the wrong terminal security code five times Do not use easily estimated numbers for security codes to be continuously, the power is turned off.

  • Page 41: Network Security Code

    Network security code PIN1 code/PIN2 code You set arbitrary code at the time of subscription but you can [0000] is set at the time of subscription but you can change the change the code. code. Network security code is a four-digit code required for confirming the You can set two security codes, PIN1 code and PIN2 code, on the subscriber’s identity when an order is received at a docomo Shop, UIM.

  • Page 42: Various Lock Functions

    Changing PIN1 code/PIN2 code Various lock functions When the PIN1 code input set is set to [OFF], you cannot change the PIN1 code. Lock Operation/Restriction function ][SETTINGS]/[Security]/[UIM All lock Prevents all operations other than power on/off and Settings]/enter the terminal security answering calls.

  • Page 43: Incoming Call Restriction

    Incoming call restriction Lock Operation/Restriction function Rejecting a call with no caller ID IC card lock Prevents the use of IC card functions. & (for at least 1 second)/[IC Enable: You can set the handset to reject calls with no caller ID depending on card lock]/[Yes] reason (User unset, Payphone, Unavailable).

  • Page 44: Resetting To Default

    Resetting to default Resetting data by remote control You can initialize various data (memory in the handset/ Resetting various functions microSD Card/UIM) in the specified FOMA terminal by For items return to default by Reset settings nP.84 manager’s request with the subscription of this function ][SETTINGS]/[General (Business mopera anshin manager).

  • Page 45: Making A Voice/Videophone Call

    Call Connect Making a voice/videophone call Making a call with redials/received calls & & (Received calls) (Redial)/q DOCOMO videophones comply with “3G-324M as defined by the international 3GPP standard”. Connection is not available with & Select a phone number/t videophones using other standards. s (Phone)/i (V.phone) to make a call Making a call by entering a phone number ^enter a phone number...

  • Page 46: Receiving A Voice/Videophone Call

    Making an international call Receiving a voice/videophone call WORLD CALL is an international calling service available from A call is received DOCOMO mobile phones. The ring tone sounds and the called LED flashes. WORLD CALL is registered when FOMA services are registered When the caller does not send a caller ID, a non-disclosure (excluding users who did not apply for WORLD CALL).

  • Page 47: Using Various Network Services

    When you cannot answer call Setting public mode (Power off) The FOMA terminal plays the message stating you cannot answer the Setting record message (voice/videophone phone when the power is off. calls) ^*25251/s If you set record message, the FOMA terminal answers a call and ;...

  • Page 48: Setting Call Waiting

    Refer to “Mobile Phone User’s Guide [Network Services]” for details Services available for the FOMA on each network service. terminal For subscription and inquiries, contact the number listed in “General Inquiries” on the back of this manual. For weather forecast, enter the number, starting with the area code Setting Voice Mail Service of the area you want to know the weather.

  • Page 49: Using Overseas

    The FOMA terminal supports “Location notification of emergency Using overseas call”. When dialing an emergency number such as 110, 119, and 118, the information of your location (location information) is International roaming (WORLD WING) is a service that automatically notified to the agency that receives the emergency enables you to use the same FOMA terminal as you use call (e.g.
  • Page 50 Available services overseas Making a call outside your country of stay (including Japan) Communication service Make a call from your country of stay to Japan or other countries. Voice call Videophone ^0 (for at least 1 second)/enter country code, area code (city code) and i-mode other party’s phone number i-mode mail...

  • Page 51: Sending Deco-Mail/Decome-Anime

    Mail You can exchange mails with other i-mode terminals and Sending Deco-mail/Decome-Anime e-mail via Internet by subscribing to i-mode service. You can attach up to ten files (pictures, moving picture Sending Deco-mail files, etc.) in total of 2 MB to a message. Also, Deco-mail is available.
  • Page 52 Sending Decome-Anime Checking received i-mode mail You can compose an expressive mail with Flash Receive i-mode mail movies using templates. The receive complete screen appears and the mail ring tone sounds. If you do not operate for approximately 30 seconds, the screen before reception reappears.

  • Page 53: Using Sms

    Sorting i-mode mail Setting Area Mail ^m/[Mail setting]/[Area Mail Set sort rules for user folders in Inbox/Outbox and sort i-mode mail and SMS automatically. setting]/[Receive setting] Multiple sort rules can be set for one folder. & Select the setting/t Select a folder/C/[Sort rules] &...

  • Page 54: Adding Entries To Phonebook

    Phonebook You can use the FOMA terminal phonebook and UIM Adding entries from redials/received calls to phonebook. phonebook Adding entries to phonebook & & (Received calls) (Redial)/q Main entry items Select a phone number/C/[Add to Icon Item Details phonebook] Name Enter a name.

  • Page 55: I-Mode/Full Browser

    i-mode/Full Browser Search i-mode enables you to use online services, such as Viewing i-mode site connection to sites and Internet. You can view sites that are not supported by i-mode as ^i/select an they appear on PCs using Full Browser. &...

  • Page 56: Switching Browsers

    Switching browsers Viewing and operating sites Note that different transmission charges are incurred when Selecting a link and moving to a new screen switching between i-mode and Full Browser. & While viewing sites, select a link with Switching from i-mode to Full Browser &...

  • Page 57: Saving Site Contents

    Saving frequently viewed sites Saving site contents You can save frequently viewed sites and Internet web You can add (save) screens from your favorite sites, etc. pages as bookmarks for convenient access. as screen memos to the FOMA terminal or microSD Card. C/[Bookmark]/ While viewing sites, C/[Screen While viewing sites,...

  • Page 58: Displaying I-Channel

    i-Channel ※ The i-Channel service is provided in Japanese. Displaying i-Channel i-Channel is a service that sends news and other ^c (J) information. The latest information received automatically is displayed in the stand-by display using a & Select a channel/t ticker.

  • Page 59: Checking Your Location

    Map/GPS Note that DOCOMO shall not be liable for the pure economic loss if Checking your location you cannot confirm the positioning (communication) result with the You can check your location by positioning the present location. You FOMA terminal failure, malfunction, error or external factors such can use this function for more convenient use such as displaying a as power failure (including battery exhaustion).

  • Page 60: Using Auto-Gps

    Using AUTO-GPS Setting AUTO-GPS function ][LIFEKIT]/[Map/GPS]/ ※ The AUTO-GPS service is provided in Japanese. According to your present location, you can receive [AUTO-GPS]/[AUTO-GPS setting] various services, such as providing surrounding & Select the setting/t information including weather information, store information, etc., or sight-seeing information. Using services provided by DOCOMO If you use AUTO-GPS function, your present location is automatically measured based on your movement and location...
  • Page 61 Camera Enjoy Screen layout and operations for Main key operations for shooting screen shooting screen Change settings collectively i Select image quality m Shoot by scene Camera gallery Shooting screen layout & White balance Adjust brightness & Select save destination Adjust zoom Still picture Moving picture...
  • Page 62 Shooting still pictures Confirming shot still/moving ][CAMERA]/[Shoot still pic] pictures When still pictures shooting is activated, the called LED Displaying shot still pictures illuminates. & to shoot ][DATA BOX]/[My picture] & to save & [Camera] folder/select an image/t To set as stand-by display, etc.: C/[Set screen]/select an &...

  • Page 63: Shooting By Various Methods

    Shooting by various methods Function Details Setting/Starting method In the still picture shooting screen, C/[Select Smart resize zoom Automatically the image size is changed to suitable one according to the area affected by zoom. size]/[8M (smart rsz zm)] In the still picture shooting screen, C/[Shooting Best select photo Shoot continuously just before shutter operation.

  • Page 64: Using 1Seg

    1Seg About battery level Using 1Seg When recording is started with low battery level or battery level 1Seg is a service provided by TV broadcasters becomes low while recording, the message stating that recording is (broadcast stations), etc. Transmission charges are not impossible appears.

  • Page 65: Setting Channels

    Setting channels Preset channel setting Select a prefecture/district to use and save into the channel list. To watch 1Seg, set the channels first. ][1SEG]/[Channel setting] Auto channel setting Select a number to save/C/[Preset CH Select a prefecture/district to use. Broadcast station is automatically setting] searched and saved into the channel list.
  • Page 66 Screen layout and operations for Main key operations for 1Seg watching screen These key operations are for the video mode. watching screen & Select a station with UP/DOWN 1 to 9, *, 0, # Select a station with one-touch 1Seg watching screen layout operation &...

  • Page 67: Music&Video Channel

    Music Handling the music data Music&Video Channel ® This manual refers to Chaku-uta full and WMA (Windows Media ※ The Music&Video Channel service is provided in Japanese. Audio) files played using MUSIC Player as “music data”. Music&Video Channel is a service that set music •...

  • Page 68: Setting Programs

    Setting programs Screen layout and operations for MUSIC Player screen ][MUSIC]/[Music&Video ch]/[Set program]/[Yes] MUSIC Player screen layout Follow instructions on screen and set a program ] appears in the stand-by display 12 hours before the program distribution. Jacket image The acquisition of the program is automatically performed at Title night.

  • Page 69: Playing Music Data

    Main key operations for MUSIC Player Playing music data screen ][DATA BOX]/[MUSIC] & Pause/Play & Select music data/t Stop & Adjust volume Mute/Disable The music data previously played resumes from the position when & Play previous song/Return to the playback stopped if beginning of song [Continue] is selected.

  • Page 70: Activating I-Appli

    i-appli/i-Widget “i-appli” is software for the i-mode compatible mobile Activating i-appli phone. Download various software from i-mode sites for ][i-APPLI]/[Software list] more convenient use of the FOMA terminal, such as updating stock prices or weather information & Select software/t automatically, or enjoying games without connecting to the network, etc.
  • Page 71 i-motion/Movie i-motion refers to image, voice and music data. You can Playing i-motion downloaded from download i-motion to the FOMA terminal from i-motion sites compatible sites, etc. and play the downloaded i-motion. Also, you can search for i-motion compatible sites in [メ &...

  • Page 72: More Convenient

    Osaifu-Keitai More Convenient Holding b mark over scanning devices Osaifu-Keitai/ToruCa Hold the b mark of the FOMA terminal over the scanning device to Osaifu-Keitai is a function which has built-in IC card and use as electronic money or railway tickets, or retrieve ToruCa. allows you to pay, use as coupon tickets or collect Pay attention to the following points when holding the b mark over stamps by simply holding the FOMA terminal over the...
  • Page 73 In addition to monthly usage fees of i-concier, a separate fee may be incurred depending on contents (information, i-schedule, etc.). ® “ひつじのしつじくん ” Packet transmission charges are incurred for receiving information ©NTT DOCOMO excluding some cases. & /select the & message/t Packet transmission charges are incurred for using detailed information.

  • Page 74: Convenient Tools

    Convenient Tools Using schedules Using bar code reader ][LIFEKIT]/[Classic schedule] You can connect to i-mode or Full Browser, compose a mail, make voice/videophone calls, compose SMS and & & /select a To check a schedule: Select a date with run i-appli with scanned text from bar codes (JAN/QR &...
  • Page 75 Other convenient tools Function name Details Starting method ][CAMERA]/[Shot memo] Shot memo You can use images as memos by correcting tilt of shot images, or correcting characters with white background to read easily. ][CAMERA]/[Kanji/English Grabber] Kanji/English Grabber You can scan kanji and English words and display readings or meanings.

  • Page 76: Data Management

    Data Management Do not remove the microSD Card or turn off the FOMA terminal Using microSD Card immediately after inserting the microSD Card to the FOMA terminal, or while editing data on a microSD Card. Data may be damaged You can save data, such as the phonebook, mail or and operation may not work properly.
  • Page 77 Inserting/Removing microSD Card Copying data to microSD Card/FOMA terminal Insert the microSD Card with the metal terminal side turned down Example: i-motion Gently push the microSD Card in before removing. ][DATA BOX]/[i-motion/Movie] [bｍicroSD])* * When the save destination is microSD Select i-motion/C/[Move/Copy]/ [Copy to microSD]/[Copy to the phone]...

  • Page 78: Receiving Data

    Sending and receiving data via Ir Sending and receiving data via iC communication communication 15° 15° Infrared port Approx. 20 cm or less Face the infrared ports of the receiver’s and sender’s FOMA terminal each other and set the distance between them to approximately 20 cm or less.
  • Page 79 Connecting to PC By connecting the FOMA terminal and your PC, exchange WMA files and images in the microSD Card. In addition, connect to Internet and perform data communication. FOMA USB Cable with Charge Function 02 (sold separately) or FOMA USB Cable (sold separately) is required. For a data communication, installation of the FOMA communication configuration file from the accompanying CD-ROM is required.

  • Page 80: Troubleshooting

    Support Others Terminal operation Troubleshooting Becomes hot while operating/charging First, check whether the software update is required. If it is required, Temperature of the FOMA terminal, battery pack, or adapter update the software (nP.81). may rise while operating or charging, or when performing If there is no improvement in problems even after checking the following –...

  • Page 81: Warranty And After-Sales Service

    Calling Warranty and After-Sales Service Calls cannot be made with the dial Warranty Make sure All lock is not set. P.40 Make sure Keypad dial lock is not set. P.40 Make sure that the warranty card is included with your FOMA terminal at Make sure self mode is not set.

  • Page 82: I-Mode Fault Diagnosis Site

    During the warranty period Do not peel off the model nameplate attached to the FOMA terminal. If the nameplate seal does not function as a certification, repairs may be The FOMA terminal will be repaired without charge in accordance with the terms of the warranty.

  • Page 83: Updating Software

    If software update fails, [Rewrite failed] appears and all operations Updating software are not available. In this case, bring the FOMA terminal to a repair center that DOCOMO specifies. You can update software if the FOMA terminal software Updating software is not available overseas. need to be updated using packet transmission.
  • Page 84 Checking harmful data Displaying scanned results Displaying detected errors Delete or stop activating any data or applications that could cause operational malfunctions. These types of If you select [Detail] in the warning screen, data include data or programs that are downloaded to the error names appear.

  • Page 85: Introduction Of Options And Related Devices

    Bone conduction microphone/receiver 01 Introduction of options and related FOMA USB Cable with Charge Function 02 devices FOMA Portable Charging Adapter 01 FOMA Indoor Booster Antenna (Stand Type) Combine the FOMA terminal with various optional *1 Refer to P.24 for details on charging with an AC adapter. *2 Connect Earphone Plug Adapter for External connector terminal accessories (sold separately) for expanded personal and 01 and Earphone Plug Adapter to use these options and related...

  • Page 86: Camera Menu

    Appendix i-appli menu Menu list i-APPLI When settings are reset by Reset settings (nP.42), functions return to Software list default settings (marked with i-appli call logs • Some items may include functions which do not return to default i-appli setting i-appli volume settings.

  • Page 87: Settings Menu

    CAMERA (2/2) MAIL (2/2) Shotdeco Mail setting SMS setting Cameraloupe Area Mail setting Hand mirror Auto save at edit Mark read after pv Mail menu Check mail set Reset mail settings MAIL (1/2) Secret mail settings Inbox Address/Spam Mail Settings Compose message Settings menu Outbox...

  • Page 88: Phone Menu

    SETTINGS SETTINGS General settings Check status Phone settings In-call settings Text input setting Headset sw to call Auto power ON/OFF Incoming settings Date settings Videophone set Select language Record message Side key shortcut Set when closed Auto SW vert/horiz Self mode USB mode setting Femtocell setting Scanning function...
  • Page 89 Osaifu-Keitai menu i-concier menu OSAIFU-KEITAI i-CONCIER IC card content i-concier 1Seg menu DCMX ToruCa 1SEG IC card lock IC lock(power-on) Activate 1Seg IC lock(power-off) Program guide Setting ToruCa from IC card Timer list ToruCa from 1Seg Reserve rec hist ToruCa duple check TVlink ToruCa auto read Channel setting...

  • Page 90: Music Menu

    LIFEKIT (1/3) LIFEKIT (2/3) Simulated call Run simulated call Document Viewer Select ring tone PDF Viewer Calling timing set LIFEKIT (3/3) Setting when silent Voice recorder Shot memo Voice memo/Rec msg Kanji/English Grabber Classic schedule Wellness Run i-appli Quick search Check no.

  • Page 91: Main Specifications

    Main specifications Main camera: Approx. 8.0 million pixels Effective pixels Sub camera: Approx. 0.43 million pixels Package Recorded pixels Main camera: Approx. 8.0 million pixels Camera (Max.) Sub camera: Approx. 0.41 million pixels Product name SH-08B Main camera: Up to approx. 20.4× Zoom (Digital) Approx.

  • Page 92: Battery Pack

    *6 A CCD (Charge Coupled Device) and a CMOS (Complementary i-motion: Approx. 510 min Metal-Oxide Semiconductor) are image devices equivalent to the film of ® Chaku-uta full (Compatible with silver salt cameras. background playback): Approx. 1,260 *7 Image size: QVGA (240 × 320 dots)/Image quality: NORMAL/File size: 25 KB WMA file (Compatible with background *8 The number is the number of still pictures that can be shot when not...
  • Page 93 Number of saved/registered entries in the Number of applicable Data type entries to be saved/ FOMA terminal registered Number of applicable *5, 6 e-book/e-dictionary/e-comic 1,000 Data type entries to be saved/ 1Seg video registered Font (TTF) Phonebook 1,000 *1 You can save up to 50 entries in the UIM. 1Seg TVlink *2 Total number of the timers for starting and recording programs.

  • Page 94: Specific Absorption Rate (Sar) Of Mobile Phone

    Specific Absorption Rate (SAR) of NTT DOCOMO http://www.nttdocomo.co.jp/english/product/sar/ mobile phone SHARP Corporation http://www.sharp.co.jp/products/menu/phone/cellular/sar/index.html This model phone SH-08B meets the MIC’s technical regulation (in Japanese only) for exposure to radio waves. Ministry of Internal Affairs and Communications The technical regulation established permitted levels of radio frequency...
  • Page 95 3. Connect the equipment into an outlet on a circuit different from that to Declaration of Conformity which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Information Your handset is a radio transmitter and receiver. Hereby, Sharp Telecommunications of Europe Ltd, declares It is designed and manufactured not to exceed the emission limits for that this SH-08B is in compliance with the essential...

  • Page 96: Export Administration Regulations

    “i-motion”, “i-mode”, “DCMX”, “WORLD WING”, “WORLD CALL”, Exchange and International Trade Law” and its related laws) will “OFFICEED”, “i-area”, “2in1”, “docomo STYLE series”, the “i-mode” logo, be applied to this product and its accessories under certain the “FOMA” logo, the “i-appli” logo are trademarks or registered conditions.
  • Page 97 ™ Powered by JBlend Copyright 2002-2009 Aplix Corporation. This product utilizes Morpho Effect Library [PRETTY], a product of All rights reserved. Morpho, Inc. JBlend and JBlend related trademarks are registered Morpho Effect Library [PRETTY] is trademark of Morpho, Inc. trademarks or trademarks of Aplix Corporation in Japan and This product includes a face recognition engine other countries.
  • Page 98 ® ® ® This product is licensed under the MPEG-4 Systems Patent Portfolio Contains Adobe Flash Lite ® License for encoding in compliance with the MPEG-4 Systems Standard. Adobe Reader Mobile technology by An additional license and payment of royalties are necessary in the Adobe Systems Incorporated following cases.
  • Page 99 Content owners use Windows Media digital rights management Internet dictionary embedded in this product uses the BSD license. (WMDRM) technology to protect their intellectual property, including Copyright © 2002,2003, Stefan Haustein, Oberhausen, Rhld., Germany copyrights. This device uses WMDRM software to access All rights reserved WMDRM-protected contents.
  • Page 100 Index Numerics Brightness ......37 DOCOMO service setting ....58 ®...
  • Page 101 i-appli ....... 68 Light/Power saver ..... . 36 Network security code .
  • Page 102 PUK ....... . 40 Select ring tone ......33 Select volume .

  • Page 103: Using Mobile Phone With Your Manners

    Check/Change the subscription, apply for various services, and request various information materials online. From i-mode iMenu/お客様サポート (user support)/お申込 ・ お手続き (Applications/Procedures)/各種お申込 ・ お 手続き (Various Applications/Procedures) Packet communication charges free (in Japanese only) My docomo (http://www.mydocomo.com/)/各種お申込 ・ お手続き (Various Applications/Procedures) From a PC (in Japanese only) ※...
  • Page 104 ’10.5 (1st Edition) 10E TU104 ...

  • Page 105: Manual For Pc Connection

    SH-08B Manual for PC Connection Data communication............1 Before using data communication .

  • Page 106: Data Communication

    Data communication Data communication available for the FOMA terminal The FOMA terminal communication formats fall into three categories: packet transmission, 64K data communication and data transfer. The FOMA terminal does not support fax transmissions. The FOMA terminal supports data communication with sigmarionⅢ. The high-speed communication for FOMA HIGH-SPEED area is not supported.

  • Page 107: Things To Keep In Mind

    Things to keep in mind Internet service provider fees ■ When using the Internet, usage fees are charged by the Internet service provider. These usage fees, paid to the Internet service provider, are separate from the FOMA service fee. Contact your Internet service provider for more information about usage fees.

  • Page 108: Required Equipment

    Take the steps below when menus do not appear even if the CD-ROM is set. For Windows 7 In the [スタート] (Start) menu of Windows, specify [<CD-ROM drive name>:index.html] in the [プログラムと ファイルの検索] (Program and file search) field and click [index.html] displayed in the search result field. For Windows Vista In the [スタート] (Start) menu of Windows, specify [<CD-ROM drive name>:index.html] in the [検索の開始] (Start search) field and click [index.html] displayed in the search result field.

  • Page 109: Flow Of Setup For Data Communication

    Flow of setup for data communication This section describes the preparation required to connect the FOMA terminal to your PC, and use a packet transmission and 64K data communication. The flow is as shown below. Download and install the FOMA communication configuration file Install from the accompanying CD-ROM (nP.

  • Page 110: Connecting Up Pc To The Foma Terminal

    Connecting up PC to the FOMA terminal Connect the FOMA terminal to your PC with both devices turned on. If the FOMA communication configuration file is already installed, [x] appears on the FOMA terminal screen. If the FOMA communication configuration file is not installed, install the file before connecting the FOMA terminal to the PC (nP.

  • Page 111: Installing Foma Communication Configuration File

    Installing FOMA communication configuration file To make data communication by connecting the FOMA terminal to a PC via FOMA USB Cable with Charge Function 02 (sold separately), the FOMA communication configuration file is required. End all resident software before the FOMA communication configuration file (Driver) is installed. Installing FOMA communication configuration file (Driver) Install on the PC using a user with administrator rights.
  • Page 112 Double-click [SH_Setup.exe]. For Windows Vista and Windows XP Double-click [SH08Bs.exe] and proceed to step 6. Make sure that [セットアップ後ドライバインストールを開始する。 ] (Start installing driver after setup.) shows E and click [セットアップ開始] (Start setting up). : When H appears instead, change to E. When the setup complete screen appears, click [OK].
  • Page 113 Confirming installed FOMA communication configuration file (Driver) If the FOMA terminal is not properly recognized by the PC, setup and communications are not possible. Example: Confirming Windows 7 drivers The screens are different for Windows Vista and Windows XP. Click [スタート] (Start) menu/[コントロールパネル] (Control panel) and click [システムとセキュリティ] (System and security).
  • Page 114 Uninstalling FOMA communication configuration file (Driver) This section describes how to uninstall the FOMA communication configuration file. When uninstalling the FOMA communication configuration file, the PC user must have administrator rights. An error will occur when other users attempt to uninstall this software. Contact the computer manufacturer or Microsoft Corporation for information about configuring the administrator rights setting.

  • Page 115: Set Network Transmission With Docomo Connection Manager

    Perform steps 1 and 2 of “Installing FOMA communication configuration file (Driver)” on P. 6. Double-click [SH_DeleteMetadata.exe]. Click [削除開始] (Start deleting). When the uninstall complete screen appears, click [OK]. : Deletion of the device metadata finishes. When [プログラム互換性アシスタント] (Program Compatibility Assistant) appears, click [このプログラムは正しくイ ンストールされました] (This program installed correctly).

  • Page 116: Before Installing Docomo Connection Manager

    Before installing DOCOMO Connection Manager Installation flow ■ STEP１ Setup preparation Prepare the FOMA terminal and the FOMA USB Cable with Charge Function 02 (sold separately) or the FOMA USB Cable (sold separately). STEP２ Confirming the content of subscription Confirm the content of subscription to the service and Internet service provider. STEP３...

  • Page 117: Installing Docomo Connection Manager

    Installing DOCOMO Connection Manager Example: Installing to Windows 7 The screens are different for Windows Vista and Windows XP. Insert the accompanying CD-ROM into your PC. Click [インターネット接続] (Internet connection)/[インストール] (Install) in the [本CD-ROMからのFOMAデータ通信の設定方法] (Setting method for FOMA data communication using this CD-ROM) field. : When [インストール] (Install) is clicked, the following warning message may appear.
  • Page 118 Confirm the content and click [次へ] (Next). : The precaution appears. Make sure to confirm its content. Click [キャンセル] (Cancel) to cancel the installation. Read the licensing agreement and select [使用許諾契約の条項に同意します] (Agree to articles of the user licensing agreement) and then click [次へ] (Next) to agree.
  • Page 119 Click [完了] (Finish). : Installation is completed. For Windows XP, when MSXML6 and Wireless LAN API are not installed, their installation is required before installing DOCOMO Connection Manager. When confirmation screen appears, click [Install] and install MSXML6 and Wireless LAN API. Restart Windows after installation of MSXML6 and Wireless LAN API is completed, then installation of DOCOMO Connection Manager automatically begins.

  • Page 120: Set Network Transmission Without Using Docomo Connection Manager

    Set network transmission without using DOCOMO Connection Manager Setting communications for packet transmission and 64K data communication This section describes how to set up packet transmission and 64K data communication without using DOCOMO Connection Manager. To make the settings, communication software for entering AT commands are required. “Hyper terminal” is used here.
  • Page 121 Enter a name (such as a host name) in the [名前] (Name) field and click [OK]. : The advanced settings screen for phone number appears. Select [FOMA SH08B] from [接続方法] (Connection method), enter a temporary number in the [電話番号] (Phone number) field that does not actually exist (such as [0]), and click [OK].
  • Page 122 When confirming APN settings using AT commands : AT+CGDCONT?o Refer to P. 30 for details on AT commands. Confirm that [OK] appears and select [ハイパーターミナルの終了] (Exit hyper terminal) from the [ファイル] (File) menu. : Hyper terminal ends. : [セッション×××を保存しますか？] (Save session xxx?) appears.

  • Page 123: Setting Dial-Up Network

    Send/Not send setting on dial-up networks ■ Adding “186” (Send) and “184” (Not send) to the host number in dial-up networks is also possible. Setting “186” (Send) and “184” (Not send) in both the *DGPIR command setting and the dial-up network setting results in the following.
  • Page 124 For Windows Vista Click [スタート] (Start) menu/[接続先] (Connect to) and proceed to step 4. Click [ネットワークとインターネット] (Network and Internet). Click [ネットワークと共有センター] (Network and sharing center). : The connect to a network screen appears. Click [新しい接続またはネットワークのセットアップ] (Set up new connection or network). : The connect to a network screen appears.
  • Page 125 Click [ネットワークと共有センター] (Network and sharing center)/[アダプター の設定の変更] (Change adapter setting) in [タスク] (Task). : The network connections screen appears. Select and right-click the icon for host created and select [プロパティ] (Properties). : Properties screen appears. Confirm all the settings in the [全般] (General) tab.
  • Page 126 Setting a dial-up network on Windows XP ■ On Windows XP, use “ネットワークの接続ウィザード” (Network connection wizard) to set both the host (APN) and TCP/IP protocol. Example: Using <cid>=3 to connect to mopera U, the DOCOMO Internet connection service Subscription to mopera U requires a charge. Click [スタート] (Start) menu/[すべてのプログラム] (All programs)/[アクセサ...
  • Page 127 Set options as shown in the example screen and click [次へ] (Next). : The new connection wizard complete screen appears. : When using mopera U or mopera, [ユーザー名] (User name) and [パスワード] (Password) can be left blank to connect. : When connecting to the Internet using a provider other than mopera U or mopera, enter the user name and password for the provider in the [ユーザー...
  • Page 128 Check all options to show H and click [OK]. : Properties screen of the host reappears. Click [OK] on the [プロパティ] (Properties) screen. : The host and TCP/IP protocol are set. : Refer to P. 23 for details on connecting to dial-up network. Connecting to dial-up network Example: Connecting to the dial-up network via FOMA USB Cable with Charge Function 02 on Windows 7 The screens are different for Windows Vista and Windows XP.
  • Page 129 Confirm the settings and click [ダイヤル] (Dial-up). : The FOMA is connected to the host. : The phone number set in “Setting dial-up network” (nP. 18) appears in the [ダイヤル] (Dial-up) field. : When using mopera U or mopera, [ユーザー名] (User name) and [パスワード] (Password) can be left blank to connect.

  • Page 130: Sending And Receiving Data (Obex ™ Communication)

    ™ Sending and receiving data (OBEX communication) Sending/Receiving FOMA terminal data to/from a PC The FOMA terminal has OBEX ™ function as a data communication protocol. Connect the FOMA terminal to your PC via FOMA USB Cable with Charge Function 02 (sold separately), and the data communication (data communication with OBEX ™...
  • Page 131 Sending single data item (Write 1) Send data from a PC to a FOMA terminal one item at a time. Sending one item at a time from a FOMA terminal to a PC is not possible. Data transfer operating methods differ depending on the software used. Refer to the software manual for details.

  • Page 132: List Of At Command

    List of AT command AT commands AT commands are commands used to set the FOMA terminal functions from a PC. When AT commands are entered from a PC, the FOMA terminal performs the corresponding operations. AT command input format ■ AT commands must always start with “AT”.
  • Page 133 List of AT command [M]: AT commands that can be used with the FOMA SH08B Modem Port. Execution AT command Overview Parameter/Explanation example The modem function of the FOMA terminal can be controlled by adding commands in the ― list to the end of this command. ※...
  • Page 134 Execution AT command Overview Parameter/Explanation example AT*DGAPL=<n> Sets host (APN) to accept Adds or deletes from Accept calls list with <n> AT*DGAPL=0,1o [,<cid>] transmissions for incoming packet parameter. If <cid> parameter is abbreviated, communications. APN settings adds (<n>=0) or deletes (<n>=1) all of <cid> AT*DGAPL?o use <cid>...
  • Page 135 Execution AT command Overview Parameter/Explanation example AT+CBC Inquires the battery status. The result from this command is in the AT+CBCo following format. +CBC:0,80 +CBC:<bcs>,<bcl> <bcs> 0 : The battery operates the FOMA terminal 1 : Charging the battery 2 : The battery is unconnected 3 : Reducing the power <bcl>...
  • Page 136 Execution AT command Overview Parameter/Explanation example AT+CLIP=<n> Shows PC calling number when <n> AT+CLIP=0o receiving 64K data 0 : Does not output results (default setting) communication. 1 : Outputs results Displays +CLIP:<n>,<m> for “AT+CLIP?”. AT+CLIP?o <m> +CLIP:0,1 0 : NW setting to not send own number during transmissions 1 : NW setting to send own number during transmissions...
  • Page 137 Execution AT command Overview Parameter/Explanation example AT+COPS=[<m Selects a telecommunications <mode> AT+COPS ode>[,<format>[ carrier to be connected. 0 : Auto (Automatically searches network and =1,2,“44F001” ,<oper>]]] switch telecommunications carriers) 1 : Manual (Connects to the telecommunications carrier specified in <oper>) 2 : Cancels (disconnects) the connection to (Connects to the telecommunications carrier...
  • Page 138 Execution AT command Overview Parameter/Explanation example AT+CR=<mode> Sets whether to display packet <mode> AT+CR=1o transmission/64K data 0 : Does not display when line is connected communication before (default setting) ATD*99***1# “CONNECT” result code is 1 : Displays when line is connected +CR:GPRS displayed during line connection.
  • Page 139 +++ (Does not appear) ― ATHo NO CARRIER ATI<n> Displays the verification code. n=0 : NTT DoCoMo ATI0o n=1 : Displays abbreviated product name NTT DoCoMo (FOMA SH08B) n=2 : Displays the product version in a format such as “VerX.XX”...
  • Page 140 Execution AT command Overview Parameter/Explanation example Returns to online data mode from ATOo online command mode during CONNECT ― communication. ATQ<n> Sets whether to display result n=0 : Displays result codes (default setting) ATQ0o codes. n=1 : Does not display result codes ATV<n>...
  • Page 141 Execution AT command Overview Parameter/Explanation example ATS5=<n> Sets the backspace (BS) When detected while entering an AT ATS5=8o character. command, the last character in the input buffer is deleted. The settings cannot be ATS5?o changed (default setting: n=8). ATS6=<n> Sets pause time (seconds) until Sets a register, but has no other effect.

  • Page 142: Error Reports

    Reasons for disconnection Packet transmission ■ Value Reason Host (APN) does not exist, or was incorrect. Disconnected by network. No packet transmission subscription. Disconnected properly. 64K data communication ■ Value Reason Specified number does not exist. Disconnected properly. Line busy. Number was dialed, but no response received within specified time.
  • Page 143 Operation when parameter is abbreviated AT+CGDCONT= Clears all <cid> settings. Resets <cid>=1 or 3 setting to default value. AT+CGDCONT=<cid> Clears specified <cid> setting. Resets <cid>=1 or 3 setting to default value. AT+CGDCONT=? Displays list of values that can be set. AT+CGDCONT? Displays current settings.

  • Page 144: Result Codes

    Command name: +CGEQREQ=[parameter] ■ Overview Sets QoS (Quality of Service) required of the network when establishing PPP packet transmission. Not stored in FOMA terminal’s memory with AT&W commands. Not reset with AT&F or ATZ commands. Syntax AT+CGEQREQ=[<cid> [,<Traffic class> [,<Maximum bitrate UL> [,<Maximum bitrate DL> [,,,,<Maximum SDU size>]]]]]o Parameter description This setting is assigned to each cid by default value.
  • Page 145 Numerical display Text display Meaning NO ANSWER Connection completed. The server connection timed out. RESTRICTION Network restricted. DELAYED Redial restricted. Extended result codes ■ Numerical display Text display Meaning CONNECT 1200 FOMA terminal and PC connected at 1,200 bps. CONNECT 2400 FOMA terminal and PC connected at 2,400 bps.

  • Page 146: Kuten Code List

    Kuten Code List ’10.5 (1st Edition)
  • Page 147 Use four-digit kuten codes to enter kanji, hiragana, katakana, symbol, and alphanumeric characters. Each kuten code corresponds to a particular character. Refer to “Inputting Kuten Code” of the user’s guide for details. If an unregistered kuten code is entered, either a space or nothing will be entered. Some entries in the kuten code list may differ from on the screen.
  • Page 148 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 肩...
  • Page 149 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 枠...
  • Page 150 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 浚...

This manual is also suitable for:

Sh-08b

Table of Contents