Download Print this page

HeyGears ULTRACRAFT A2D HD Installation

Industrial dental 3d printer

Advertisement

Quick Links

Manufacturer name: GUANGZHOU HEYGEARS IMC. INC
Manufacturer address: BLOCK B2,501,601,ENTERPRISE ACCELERATOR KAIFA DISTRICT, GUANGZHOU,CHINA
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
AUTION RISK OF EXPLOSION IF BATTERY IS REPLACEDBY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Do not disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
Do not leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage
of flammable liquid or gas
Do not expose the battery to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas
WARNING
UV emitted from this product.
Avoid eye and skin exposure to unshielded product.
www.heygears.com
sales@heygears.com
www.heygears.com
sales@heygears.com
+86 020 22042035-1-2
Heygears888
USA: 17931 Sky Park Circle, Suite E, Irvine, CA, 92614
CHN: Block B2, 501, 601, Enterprise Accelerator,
Kaifa District, Guangzhou, Guangdong, China
Quick start V1.0
Industrial Dental 3D Printer

Advertisement

loading
Need help?

Need help?

Do you have a question about the ULTRACRAFT A2D HD and is the answer not in the manual?

Questions and answers

Summary of Contents for HeyGears ULTRACRAFT A2D HD

  • Page 1 Manufacturer name: GUANGZHOU HEYGEARS IMC. INC Manufacturer address: BLOCK B2,501,601,ENTERPRISE ACCELERATOR KAIFA DISTRICT, GUANGZHOU,CHINA Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
  • Page 2 Thank you for choosing HeyGears. For your own safety, please operate as per this Quick Start. you fail to comply with the instructions in this manual, HeyGears will not be liable for the conse- quential damages unless required by all applicable laws and regulations.
  • Page 3 Refer to Chapter 6 to clean the projection glass, the resin STEP 1 Please bind the device on HeyGears Cloud (Obtain the website address at tank, and the build platform, and then install the resin tank and the build Settings >...
  • Page 4 Build Platform Cleaning Repairs and Latest Quick Start Put the platform in a clean box (recommended Repairs should be carried out by HeyGears or agencies with HeyGears’ authorization. dimensions: 215mm*145mm), add a proper Please refer to the Warranty Card for warranty policies.