Advertisement
Personal Desktop 3D Printer
heygears.com
info@heygears.com
Tel: +1 (318) 353-4295 (Global)/ +1 (949) 418-9418 (USA) / +44 148-396-8549 (EU)
USA-17931 Sky Park Circle, Suite E, Irvine, CA, 92614
CHN-Block B2, 501, 601, Enterprise Accelerator, Kaifa District, Guangzhou City
Follow us @HeyGears
Quickstart V1.0
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HeyGears Reflex
Summary of Contents for HeyGears Reflex
- Page 1 Personal Desktop 3D Printer heygears.com info@heygears.com Tel: +1 (318) 353-4295 (Global)/ +1 (949) 418-9418 (USA) / +44 148-396-8549 (EU) USA-17931 Sky Park Circle, Suite E, Irvine, CA, 92614 CHN-Block B2, 501, 601, Enterprise Accelerator, Kaifa District, Guangzhou City Follow us @HeyGears Quickstart V1.0...
- Page 2 If you fail to comply with the instructions in this manual, HeyGears will not be liable for the consequential damages unless required by federal and local ordinances. Please keep this operation manual properly for future reference. The pictures are for reference only and the products are subject to the actual product.
- Page 3 Installation Requirements Connect the power supply as shown, and turn on the power switch, STEP 2 then the touch screen lights up to indicate that the power is successfully connected. Connect to the power supply Screen Turn on the lights up switch Position the printer onto a stable table Click the button...
- Page 4 Take out the liquid & temperature sensor and install it in the resin Follow the Ultraflow guide to complete the device binding and STEP 7 tank as shown below. Make sure that the sensor is magnetically pre-processing, and send the job to the printer for printing. attracted to the resin tank, and the convex part at the end is inserted into the specified position, then you can shake it gently to STEP 8...
- Page 5 Install the new release film into the resin tank in the same position STEP 5 and re-lock the removed screws to the original holes. Reinstall the resin tank according to the guidelines. Install the new release film Re-lock the screws Pull out the Press the suspension button Remove the resin bottle...
Need help?
Do you have a question about the Reflex and is the answer not in the manual?
Questions and answers