Page 1
® Assembly and Use Instructions for Model: 26110 26111 26112 26113 26114 26122 VER. 1, 6/26/2019 PLEASE READ ALL RULES FOR SAFE OPERATION AND HELPFUL HINTS BEFORE USING. WARNING: FUELS USED IN WOOD OR CHARCOAL BURNING APPLIANCES, AND THE PRODUCTS OF COMBUSTION OF SUCH FUELS,...
Page 2
PAGE 2 ® READ FIRST! RULES FOR THE BRUNSWICK OUTDOOR FIRE PIT SAFE OPERATION. • THIS FIRE PIT IS FOR OUTDOOR USE ONLY! • USE ONLY ON BRICK, CONCRETE, STONE OR OTHER MASONRY SURFACES! • DO NOT USE ON LAWNS, WOODEN DECKS, COMPOSITE DECKS, ASPHALT OR ANY COMBUSTIBLE SURFACE.
Page 3
PAGE 3 TOOLS REQUIRED ® A Phillips or plain screwdriver and an adjustable wrench are needed for assembly. Assembly time: 10 minutes PARTS LIST When unpacking the Brunswick from the carton, make sure you find and become familiar with all the parts listed below.
Page 4
PAGE 4 ® BRUNSWICK ASSEMBLY INSTRUCTIONS STEP DO NOT RETURN PRODUCT TO THE STORE. IF YOU HAVE QUESTIONS ASSEMBLE THE LEGS OR HAVE TROUBLE WITH ASSEMBLY, PLEASE CALL 1-800-321-3473 FOR ASSISTANCE. Take each of the (4) legs [ E ] and assemble them to the firebowl [ A ] as shown using (8) washers [ BB ] and (8) hexnuts...
Page 5
PAGE 5 ® BRUNSWICK USE INSTRUCTIONS SAND FIREWOOD KINDLING STEP STEP ADD SAND ADD FUEL Before using, add a 1-1.5 in. Add up to 5 lbs. of kindling and layer of sand or about 5 lbs. firewood to the firebowl. Use (size wise, its the same amount paper or firestarter under the as a 5 lb.
Page 6
WON'T BE PRONE TO TIPPING OVER AND BEING A HAZARD. Congratulations on your purchase of the Brunswick Fire Pit! At Landmann USA, we strive to provide you with an easy to use, easy to assemble product. However, in the unlikely event your...
Need help?
Do you have a question about the 26110 and is the answer not in the manual?
Questions and answers