Related Manuals for Landmann Crossfire Firepit 25910
Summary of Contents for Landmann Crossfire Firepit 25910
- Page 1 MODEL #25910 Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 01480 421720, 9 a.m. - 5 p.m., Monday - Friday or email us at support@landmann.co.uk...
-
Page 2: Table Of Contents
Table of Contents Table of Contents ............2 Assembly ..............6-7 Safety Information ............. 2-3 How to use as a fire pit ..........8 Pre-Assembly ..............4 How to use to cook food ..........8 Tools Required .................4 Care and Maintenance ..........9 Replacement Parts List .......... -
Page 3: Safety Information
Safety Information (continued) WARNING: During use, keep the pivoting grate over the WARNING: Before each use make sure the outdoor fire fire pit as much as possible. Do not leave the cooking pit is in good working condition. grate pivoted off the fire any longer than needed. WARNING: Do not unnecessarily push down on the WARNING: Use caution after the fire has been cooking grate when it is on the pivoting rod. -
Page 4: Pre-Assembly
Pre-Assembly TOOLS REQUIRED Phillips Adjustable screwdriver wrench HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity M8 Hex Nut Leg Washer M6 x 25mm Bolts Wing Bolt M6 Hex Nut Spark Guard Washer M6 x 16mm Bolt T-Bolt... -
Page 5: Package Contents
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Part # Part Description Part # Spark Guard Cooking Grate Firebowl Grate Rod Legs Spark Guard Hook Poker Wood Grate Pins Ring Sections... -
Page 6: Assembly
Assembly Assembling the legs Assembling the ring sections Assemble the four legs (E) to the firebowl (C) using eight Assemble each of the three ring sections (Z) to the firebowl washers (BB) and eight hex nuts (AA). Tighten securely. using two bolts (CC). - Page 7 Assembly (continued) Placing the spark guard on the Adding sand fire pit Place the spark guard (A) onto the three pins (M). Before using, add a 1-1.5 in. layer of sand or about 5 lbs. (size wise, it’s the same amount as a 5 lb. bag of sugar) to the bottom of the firebowl.
-
Page 8: How To Use As A Fire Pit
How to Use as a Fire Pit Adding fuel Adding the spark guard Add up to 5 lbs. of kindling and firewood to the wood grate. Place the spark guard on the fire pit. Always use the spark guard during use. -
Page 9: How To Use To Cook Food
How to Use to Cook Food Assembling the cooking grate Adding food to the cooking grate Remove the spark guard. Place the grate rod (Q) into the Wipe the cooking grate with vegetable oil. Adjust the holder. Keep in place with the wing nut (EE). Place the cooking grate height as desired. -
Page 10: Replacement Parts List
Replacement Parts List Part Description Part # Part Description Part # 25910-A Spark Guard Grate Rod 25910-Q 25910-C Firebowl Spark Guard Hook 25910-T 25910-E Legs Wood Grate 25910-V 25910-F Poker Ring Sections 25910-Z 25910-M Pins Hardware Pack 25910-S1 Cooking Grate 25910-P...
Need help?
Do you have a question about the Crossfire Firepit 25910 and is the answer not in the manual?
Questions and answers