Interrupt Request Table For This Motherboard; Agp Slot - JETWAY 845CAR1A User Manual

* These IRQs are usually available for ISA or PCI devices.

2-5-3 Interrupt Request Table For This Motherboard

Interrupt request are shared as shown the table below:
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Onboard VGA
Onboard USB 1
Onboard USB 2
AC97/MC97
IMPORTANT! If using PCI cards on shared slots, make sure that the drivers support

2-5-4 AGP Slot

This motherboard provides an AGP Slot, only support the 1.5V 4X AGP VGA card.
Do not use AGP 2X card (3.3V) in this motherboard.
motherboard due to Intel® 845 chipset can not support AGP 2X (3.3V).
IMPORTANT!
INT A INT B INT C INT D INT E INT F INT G INT H
√
√
√
"Shared IRQ" or that the cards don't need IRQ assignments. Conflicts
will arise between the two PCI groups that will make the system
unstable or cards inoperable.
Before you plug-in AGP card, please make sure the following notice
is fully understood and practiced. If your AGP card has "AGP 4X
notch (show below) please make sure your AGP card is AGP 4X
(1.5V) not AGP 2X (3.3V)
√
√
√
√
It will burn and damage the
2x notch
AGP SLOT
12
√
√
4x notch