3M PELTOR CH-3 FLX2 Fitting Instructions Manual
3M PELTOR CH-3 FLX2 Fitting Instructions Manual

3M PELTOR CH-3 FLX2 Fitting Instructions Manual

Headband headsets
Hide thumbs Also See for PELTOR CH-3 FLX2:

Advertisement

3M
PELTOR
CH-3 FLX2 Headset
Technical Data Sheet
Description
The 3M
PELTOR
protection and communication in noisy environments into
a new level of performance with newly designed speakers
and microphone. The newly designed dual mould cup give a
modern and slim look together with bright yellow colour for
enhanced visibility or black colour for situations when you
need to be discreet and blend in with your surrounding.
Applications
The 3M
PELTOR
communication in noisy environments. Suitable for work in
Pulp and Paper, Construction, Airport applications and other
workplaces, where the workers need to be connected to their
2-way handheld or fixed systems throughout the day to help
facilitate frequent contacts with co-workers.
Features
• Bright yellow colour for enhanced visibility
chnical data specifications
• Black colour (SV) when you need to blend in.
• Detachable down lead connector for high flexibility
• Improved speaker efficiency to fit todays digital device
Weight (FLX2 cable excl.)
• New noise-cancelling, water resistant microphone (IP68)
d:
MT74H52A-110: 292g
• Compatible with 3M™ E-A-Rfit validation system
MT74H52A-111: 300g
Standards
nt:
ttachment:
MT74H52P3E-110: 243g
MT74H52P3E-111: 251g
These 3M
PELTOR
d:
MT74H52B-110: 275g
accredited laboratory in accordance with the requirements
MT74H52B-111: 282g
specified in the Australian/New Zealand Standard AS/NZS
1270:2002.
ls
Declaration(s) of Conformity are available at www.3M.com/
Hearing/certs
ent wire:
Stainless steel
Configuration
nt fastener:
r:
Acetal
on:
PVC foil and polyether foam
-110 Headset Standard J11
m:
Polyether foam
• High Attenuation Standard J11 Headset
• Connects to an external PTT with J11 port
ABS plastic
• Also compatible with Ground Mech FLX2-201 cable
ature:
g temperature:
-20°C to +50°C
nnector:
-111 Headset with Built-In PTT
6-pin, mini XLR
• In-Built PTT conveniently located on the left hand side of the
:
46 mm diameter, 230 Ohm +/-10%,
cup
SPL 107 +/- 2dB, 100-8000 Hz, IP54
• -111 headset suits a wide range of different cable options
Noise cancelling microphone,
to match todays most common 2-way radios and wired
Dynamic 150 Ohm, IP 68 (6m/30min)
Microphone type:
ne type:
solutions.
Sensitivity .-71dB±3dB(0dB=1v/Pa 1KHz)
@50CM Frequency responce 200Hz
CH-3 FLX2 Headset will bring hearing
CH-3 FLX2 Headset can enhance
Weight (FLX2 cable excl.)
MT74H52A-110: 292g
MT74H52A-111: 300g
MT74H52P3E-110: 243g
MT74H52P3E-111: 251g
Headsets have been tested by an
MT74H52B-110: 275g
MT74H52B-111: 282g
Stainless steel
Acetal
PVC foil and polyether foam
Polyether foam
ABS plastic
-20°C to +50°C
6-pin, mini XLR
46 mm diameter, 230 Ohm +/-10%,
SPL 107 +/- 2dB, 100-8000 Hz, IP54
Noise cancelling microphone,
Dynamic 150 Ohm, IP 68 (6m/30min)
Sensitivity .-71dB±3dB(0dB=1v/Pa 1KHz)
@50CM Frequency responce 200Hz
CH-3 FLX2
Headband (-110, -111)
Approved Safety Helmets
Approved Safety Helmets
Helmet Model
Helmet Model
CH-3 FLX2
3M™ SecureFit™ Safety Helmet X5000
3M™ SecureFit™ Safety Helmet X5000
Helmet Att. (-110, -111)
3M™ SecureFit™ Safety Helmet X5500
3M™ SecureFit™ Safety Helmet X5500
3M™ G3000 Basic Set
3M™ G3000 Basic Set
3M™ G2000
3M™ G2000
Hearing protection for
communicating with
3M™ G3501
3M™ G3501
external two-way radio
Wiring Pin Configuration
Pin configuration
Pin configuration
-110 Headset
Pin Side
Microphone
Microphone
Microphone
Microphone
Ground
Ground
7KHz
7KHz
Helmet Att. SV (-110, -111)
Noise cancelling boom
microphone for clear
speech transmission in
noisy environments
-110 Headset
Pin Side
Speaker
Speaker
Microphone
Right Side
Right Side
Speaker
Speaker
Right Side
Right Side
Ground
Ground
Speaker
Speaker
Left Side
Left Side
Speaker
Speaker
Left Side
Left Side
Ground
Ground
CH-3 FLX2
Headband SV (-110, -111)
Size
CH-3 FLX2
S/M/L
S/M/L
L
Testable with the 3M
S/M/L
Dual-Ear Validation System .
Visit www.3m.com.au/earfit
L
-111 Headset
-111 Headset
Pin Side
Pin Side
Microphone
PTT
(Adjusted
(Adjusted
signal)
signal)
PTT
Speakers
(Paralell)
Microphone
Microphone
Speakers
Speaker
Ground
Ground
Ground
(Paralell)
S
S
S
PTT
PTT
Spea
(Par
Ground
(Paralell

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PELTOR CH-3 FLX2 and is the answer not in the manual?

Questions and answers

Summary of Contents for 3M PELTOR CH-3 FLX2

  • Page 1 • New noise-cancelling, water resistant microphone (IP68) Helmet Model Helmet Model Size MT74H52A-110: 292g MT74H52A-110: 292g • Compatible with 3M™ E-A-Rfit validation system MT74H52A-111: 300g MT74H52A-111: 300g CH-3 FLX2 CH-3 FLX2 3M™ SecureFit™ Safety Helmet X5000 3M™ SecureFit™ Safety Helmet X5000 S/M/L Helmet Att.
  • Page 2: Quick Reference

    -20°C (-4°F) to 40°C (104°F), <90% humidity Product lifetime Up to 5 years (excl. batteries) Other Colour Bright Yellow or Black Version (SV) Available Hygiene Kit HY84 Compatible with 3M Versaflo ™ ™ Yes (MT74V/1) HeadTop Compatible with 3M E-A-Rfit ™...
  • Page 3: Fitting Instructions

    Fitting Instructions Helmet Attach Headset Inspect the hearing protector before each use. If damaged, To fit the hearing protector: select an undamaged hearing protector or avoid the noisy • Fit the cup: Push the attachment blade firmly into the slot environment.
  • Page 4 • 3M Earplug, earmuff and headset (comms) testing ™ is calculated and a Personal Attenuation Rating (PAR) is capability displayed. Contact your 3M Personal Safety Specialist to find out more about our 3M E-A-Rfit Dual-Ear Validation System or for ™ ™...
  • Page 5 3M strongly recommends personal fit testing of hearing protectors. Research suggests that users may receive less noise reduction than indicated by the attenuation label value(s) on the packaging due to variation in fit, fitting skill, and motivation of the user.
  • Page 6: Cleaning And Maintenance

    Disposal When used regularly, 3M recommends replacing the foam liners and ear cushions at least twice a year to maintain If the product is to be disposed*, it should be disassembled consistent attenuation, hygiene, and comfort.
  • Page 7: Ordering Information

    Ordering Information Availability SAP ID Legacy ID Model # Description Headsets 7100203637 UU010246302 • • MT74H52A-110 PELTOR CH-3 Headset MT74H52A-110, ™ ™ Headband, FLX2, 1 Each 7100203636 UU010246914 • • MT74H52B-110 PELTOR CH-3 Headset MT74H52B-110, ™ ™ Neckband, FLX2, 1 Each 7100203635 UU010246922 •...
  • Page 8: Important Notice

    For proper use, see supervisor or User Instructions. To the extent permitted by law, 3M shall not be liable for any Always ensure the hearing protection device (HPD) is: loss or damage including any loss of business, loss of profits, •...

This manual is also suitable for:

Mt74h52a-110Mt74h52a-111Mt74h52a-110 svMt74h52a-111 svMt74h52b-110Mt74h52b-111 ... Show all

Table of Contents