Hawking HDWABN1 Manual page 52

Channel Number
Associated Clients
Root AP SSID
Select Site Survey
After you finish with setting, please click 'Apply', and the following
message will be displayed:
supports multiple SSID function; up to four SSIDs
can be set. If you want to configure additional
SSIDs, please click this button. For detailed
descriptions of the function, please refer to Section
2-4-1-1.
Please select a channel number you wish to use.
The channel number must be same with another
wireless Hi-Gain Outdoor Wireless-N Access Point
you wish to connect
Click 'Show Active Clients' button and a new
popup window will appear which contains the
information about all wireless clients connected to
this Hi-Gain Outdoor Wireless-N Access Point. You
can click 'Refresh' button in popup window to keep
information up-to-date
In 'Universal Repeater' mode, this device can act
as a station to connect to a Root AP. You should
assign the SSID of the Root AP here or click
'Select Site Survey' button to choose a Root AP.
Click 'Select Site Survey' button, then a "Wireless
Site Survey Table" will pop up. It will list all
available Hi-Gain Outdoor Wireless-N Access
Points near by. You can select one Hi-Gain
Outdoor Wireless-N Access Point in the table and
the Hi-Gain Outdoor Wireless-N Access Point will
join wireless LAN through this Hi-Gain Outdoor
Wireless-N Access Point. Please go to Section
2-4-2-1 for more information about the 'Wireless
Site Survey Table'.
45