Related Manuals for MACHRUS MOXIE MXSF03-6-BL
Summary of Contents for MACHRUS MOXIE MXSF03-6-BL
- Page 1 MOXIE PUMPKIN-SHAPED ™ OUTDOOR TRAMPOLINE SET WITH PREMIUM TOP-RING FRAME SAFETY ENCLOSURE FOR MODELS: USER MANUAL...
- Page 2 THANK YOU FOR PURCHASING THIS MACHRUS TRAMPOLINE Simply follow the assembly and safety instructions in this manual and you will soon be starting your Machrus exercise program for a happier, healthier and more fun lifestyle! Should you have any questions, please call our Customer Service Department...
- Page 3 GENERAL INSTRUCTIONS Included in this manual are instructions for: Proper assembly, care and maintenance of product, safety tips, warnings, and proper use; in order to ensure a secure and fun use of the trampoline. All users and supervisors must read and familiarize themselves with all these instructions and all other information in this manual.
- Page 4 Never set up the trampoline in rainy, windy or stormy conditions, especially lightening conditions. It is recommended that the trampoline be Do not alter the product; use it only as described in this manual. Care and Maintenance Always inspect the trampoline before each use. Check for damage, wear or defective parts, as they can impair the overall safety of the trampoline.
- Page 5 Do not perform somersaults on the trampoline as this will increase the chances of landing on your head or neck, paralysis or even death can result. Children do not recognize the potential dangers of this product, so do not allow your children to play on this product without adult supervision.
- Page 6 Proper Use The maximum weight allowed on the trampoline is 500 lbs. Overloading the trampoline above the recommended user weight will cause damage to the trampoline. No more than one person at a time should be allowed on the trampoline! Avoid unsupervised use of the trampoline.
- Page 7 TRAMPOLINE FRAME PARTS LIST PART # PART # PART # PART # PART # PART # PART # Description Illustration 6 FT. 8 FT. 10 FT. 12 FT. 14 FT. 15 FT. 16 FT. MXRP-TR-6 MXRP-TR-8 MXRP-TR-10 MXRP-TR-12 MXRP-TR-14 MXRP-TR-15 MXRP-TR-16 TOP RAIL Qty.
- Page 8 TRAMPOLINE ENCLOSURE PARTS LIST PART # PART # PART # PART # PART # PART # PART # Description Illustration 6 FT. 8 FT. 10 FT. 12 FT. 14 FT. 15 FT. 16 FT. MXHWD-UP-01 MXHWD-UP-02 MXHWD-UP-03 MXHWD-UP-03 MXHWD-UP-03 MXHWD-UP-03 MXHWD-UP-03 UPPER POLE Qty.
- Page 9 ASSEMBLY INSTRUCTIONS Two adults are required for the folling assembly. For your safety, you should wear suitable gloves. Failure to follow these instructions can result in injury. Step 1 : Assembling the frame The upper rail (part A) has 2 different ends - one side is narrow, the other side is wider.
- Page 10 Step 3 : Please screw the “vertical leg extensions” (part F) to the (part G). Please use the (part H) for this. Step 4 : Assemble the legs (in step 3) with the frame (in step 2). Caution! Please note that all point to the center of the...
- Page 11 Step 5 : Use caution when installing the jumping mat. Two people, work gloves, and proper attire are recommended. 1) Unfold the jumping mat inside the ring. 2) Please attach the springs. The narrower opening of the spring (A) goes into the jumping mat eyelet.
- Page 12 3) Please repeat this process for all springs one after the other. So that the tension of the jumping mat is evenly distributed, please note the Caution: ning, please use gloves! 4) Installation of the frame pad Please place the edge cover (part D) over the springs and the steel frame. Attach the elastic bands of the edge cover to the frame.
- Page 13 ENCLOSURE ASSEMBLY For your safety, it is recommended that assembly is done by 2 adults wearing working gloves. Step 1 : Please connect the poles to each other by inserting the (enclosure part B) into the upper enclosure pole (enclosure part A) securing it with the safety pin.
- Page 14 Step 4 : Hold the enclosure net (Enclosure Part C), with sleeves facing up. Pull each Connect the ends together forming a circle. This is easier when two people hold the net. Step 5 : A. Align the two parts of the Pole Clip (Enclosure Part E) according to the below diagram.
- Page 15 Step Pull back the frame pad for better visibility. Align the bottom hem of the enclosure net to the eyelet rings on the jumping mat and insert the Rope (Enclosure Part I) alternating between the slits in the jumping mat, and the eyelet rings. Congratulations you have completed the trampoline assembly!
- Page 16 JUMP LIKE A PRO! 1. Standing starting position, feet shoulder-width apart, head straight and eyes on the jumping mat. 2. Swing your arms forwards and up in a circular motion. 3. Bring your feet together in the air, toes pointing down.
- Page 17 While we provide a large variety of trampolines, we also pride ourselves in the large selection of our trampoline replacement parts which are compatible with most trampolines regardless of their brand. PLEASE GIVE US A CALL 1-888-965-3331 EMAIL US AT support@machrus.com...
Need help?
Do you have a question about the MOXIE MXSF03-6-BL and is the answer not in the manual?
Questions and answers