TSO Products MFT/3 Assembly Instructions

MFT/3 TOOL SHELF
ASSEMBLY INSTRUCTIONS
Thanks for purchasing this genuine TSO Product.
Questions? Suggestions? Ideas? We thrive on your feedback!
Contact us toll-free at 800-727-0311 (U.S.), 239-236-5526
(international), email us at info@tsoproducts.com, or visit
www.tsoproducts.com/support
Danger indicates a hazardous situa-
DANGER
tion that, if not avoided, will result in
death or serious injury.
Warning indicates a hazardous situa-
WARNING
tion that, if not avoided, could result
in death or serious injury.
Caution indicates a hazardous situa-
CAUTION
tion that, if not avoided, may result
in minor or moderate injury
or property damage.
Notice indicates important or helpful
NOTICE
information and/or user tips.
Publication 696-117 Rev. A
for a copy of this guide.
©2025 TSO Products LLC
ESSENTIAL SAFETY WARNINGS
This product is intended and designed for use only with
the Festool® MFT/3 MultiFunction Table. The Festool
Instruction Manual for the MFT/3 also applies when using
this TSO MFT/3 Tool Shelf. Ensure that the included hard-
ware are properly inserted and secured into the MFT/3
extrusion T-tracks before utilizing this shelf. Failure to do
so may result in product damage or injury.
You are responsible for the safe and proper use of this TSO
Products accessory. This is not a toy.
To make your woodworking experience enjoyable and
safe, keep in mind:
•
This MFT/3 Tool Shelf is rated for up to 25 lbs. static
load. Exceeding this limit may cause objects on the
shelf to slide and fall with risk of damage or injury.
•
This shelf is not designed to support body weight and
must never be used as a step, platform, or ladder. Doing
so may result in serious injury or damage to the table or
accessory.
The content of this assembly guide is provided solely for
the purpose of assembling the product. It is not intended
to serve as a comprehensive instruction manual or to
provide guidance on the safe operation of power tools,
including but not limited to saws. Users are expected
to have full knowledge of and adhere to the safety and
operational instructions provided by the manufacturer
of any power tools they operate.
Failure to consult the manufacturer's original instruc-
tions for safe operation and handling of power tools may
result in serious injury, damage, or death. The manu-
facturer of this product and the author of this assembly
guide assume no liability for any injuries or damages
arising from improper use of power tools or failure to
follow appropriate safety procedures. Always refer to
and follow the specific safety guidelines provided by the
manufacturer of your tools.
Woodworking involves a variety of injury risks which
you can reduce with proper use of Personal Protective
Equipment (PPE) and adherence to safe work practices.
CAUTION
Page 1 of 5