Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Safavieh Lighting Manuals
  4. Home Lighting
  5. KENSLEY SCN4067A
  6. Assembly instruction

Safavieh Lighting KENSLEY SCN4067A Assembly Instruction

Wall sconce
Hide thumbs
1
2
3

Advertisement

Quick Links

Download this manual
CAUTION:
Read instruction carefully and turn electricity off at main circuit breaker panel
before beginning installation.
ITEM#:SCN4067
Care and Cleaning
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never a
solvent) to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or
by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth(use clean water,
never a solvent) to wipe the interior surface of the fixture
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth to dust
or wipe carefully.
Estimated Assembly Time:30 minutes
Part List and Hardware List
PIECE
DESCRIPTION
A
mounting screw
B
mounting plate
C
screw
D
lamp body
E
Bulb
Assembly Instruction
PICTURE
QUANTITY PIECE
2X
1X
3X
1X
1X
DESCRIPTION
F
socket ring
G
shade
H
Wood Screw
I
Wall Anchors
1/3
PICTURE
QUANTITY
1X
1X
2X
2X

Advertisement

loading
Need help?

Need help?

Do you have a question about the KENSLEY SCN4067A and is the answer not in the manual?

Questions and answers

Related Manuals for Safavieh Lighting KENSLEY SCN4067A

Summary of Contents for Safavieh Lighting KENSLEY SCN4067A

  • Page 1 Assembly Instruction CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel before beginning installation. ITEM#:SCN4067 Care and Cleaning To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never a solvent) to wipe the surface of the fixture.
  • Page 2 Installation to outlet box Step 1 Secure mounting plate (B) to outlet box with mounting screws (A) . Attach the lamp body (D) to the mounting plate (B) and secure with retaining screw (C) Step 2 Place the shade (G) over the sockets, then secure with the socket ring (F). Loosen handles (H) or turn the lamp body left and right, can adjust the direction of shade (G) Insert the bulbs (E) into the Sockets PLEASE USE TYPE"A"...
  • Page 3 ENJOY YOUR LAMP Installation to wall Step 1 Determine the location for the lamp body. Using the mounting plate (B) as a template, mark the location of the holes for the wall anchors (I). Drill the appropriate size holes for the wall anchors (I). (the holes should be slightly smaller than the size of the anchors (I).) Install the wall anchors (I) to the hole.