Advertisement
Quick Links
WARNING
* Switch off the main electrical supply from the main fuse box / circuit breaker before installation.
* Inspect item carefully before attempting to install.
* If there is any damages or obvious defects, do not install.
* Item may not be returned once it has been installed.
CARE AND MAINTENANCE
* To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the surface of the fixture.
* To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or
by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water,
never a solvent) to wipe the interior surface of the fixture.
* Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or
wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
** WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN **
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced
If the cord is damaged, the lamp shall be destroyed
PIECE
DESCRIPTION
PICTURE
A
wire connector
B
mounting plate
mounting
C
screw
Part List and Hardware List
QUANTITY
PIECE
DESCRIPTION
3X
D
Screw
1X
E
lamp body
2X
F
Bulb
Model#: SCN4145
Product Dimensions: 7.625"L x11"W x 18"H
PICTURE
QUANTITY
4X
1X
1X
1/3
Advertisement
Related Manuals for Safavieh Lighting SCN4145
Summary of Contents for Safavieh Lighting SCN4145
- Page 1 * To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or Model#: SCN4145 by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, Product Dimensions: 7.625"L x11"W x 18"H...
- Page 2 PREPARATION * Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. * If any part is missing or damaged, do not attempt to assemble the product. * Estimated Assembly Time: 20 minutes. * Tools Required for Assembly (not included): Screwdriver, Junction box * If you are having difficulty, our friendly Customer Care team is always here to help.
- Page 3 PREPARATION * Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. * If any part is missing or damaged, do not attempt to assemble the product. * Estimated Assembly Time: 20 minutes. * Tools Required for Assembly (not included): Screwdriver, Junction box * If you are having difficulty, our friendly Customer Care team is always here to help.