Product Dimensions; Cutout Dimensions; Parts Supplied - KitchenAid KEMC378KSS - ARCHITECT Series 27'' Microwave Combination Double Wall Oven Installation Instructions

Product dimensions

27" oven
25-3/8
recessed
width
41"
recessed
height
26-3/4"
23" max.
overall width
recessed
depth

Cutout dimensions

27" min.
cabinet width
41-1/4"
25-1/2"
cutout
cutout
height
width
1-1/2"
min.
bottom of
cutout to
top of
cabinet
door
27" oven
23-1/4" min.
cutout depth
23" recessed
oven depth
recessed
cabinet
oven
Cabinet side view
Page 1
42-7/16"
overall
height
41"
recessed
height
23" max.
recessed
depth
1" top of cutout
to bottom of
upper cabinet
door
41-1/4"
cutout
height
19-1/4"
bottom of
1-1/2" min.
cutout to
bottom of
floor
cutout to
top of
cabinet
door
Cabinet filler kits are available from your dealer.
Use a matching color kit if oven is smaller than your
cabinet opening.
27" oven filler height is 7-13/16"
Black — 4378950
White — 4378951
Almond — 4378952
30" oven filler height is 4-13/16"
Black — 4378944
White — 4378945
Almond — 4378946
oven
front
Tool needed:
Phillips screwdriver
30" oven
28-3/8"
recessed
width
42-7/16"
overall
height
29-3/4"
overall width
30" min.
cabinet
1" top
of cutout
to bottom
of upper
cabinet door
28-1/2"
cutout
width
19-1/4"
bottom
of cutout
to floor
30" oven

Parts supplied:

4 screws
Before you start...
Your safety and the safety of others are
very important.
We have provided many important safety
messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards
that can kill or hurt you and others.
All safety messages will follow the safety alert
symbol and either the word "DANGER" or
"WARNING". These words mean:
DANGER
You can be killed or seriously injured if you
don't immediately follow instructions.
WARNING
You can be killed or seriously injured if you
don't follow instructions.
All safety messages will tell you what the potential
hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the
instructions are not followed.
Important: Observe all governing codes
and ordinances.
Proper installation is your responsibility.
Have a qualified technician install this oven.
Oven location should be away from strong draft
areas, such as windows, doors and strong
heating vents.
Cabinet opening dimensions that are shown
must be used. Given dimensions provide
minimum clearance.
Recessed installation area must provide
complete enclosure around the recessed portion
of the oven.
Electrical ground is required. See "Electrical
requirements."
Electrical supply junction box should be located
3 inches maximum below the support surface
when oven is installed in a wall cabinet. Cutout
for wiring should be in the right rear or left rear
corner. For undercounter installation, it is
recommended that the junction box be located
in the adjacent right or left cabinet. If installing
junction box on rear wall behind oven, junction
box must be recessed and located in the upper
or lower right or left corner of cabinet.
Oven support surface MUST be solid, level and
flush with bottom of cabinet cutout.
WARNING
Excessive Microwave Energy Exposure
Do Not attempt to operate the microwave
oven with the door open.
Do Not tamper with or defeat the safety
interlocks.
Do Not place objects between the microwave
oven front face and door.
Do Not allow soil or cleaner residue to
accumulate on sealing surface of the
microwave oven door.
Do Not operate the microwave oven if
damaged.
Do Not operate the microwave oven if:
— door is bent.
— hinges and latches are broken or loose.
— door seals, sealing surfaces or glass are
broken.
The microwave oven door must close
properly to provide safe operation.
Have a qualified repair person adjust, repair
and check microwave oven for microwave
leakage after a repair is made.
Do Not use microwave for commercial
purposes. The microwave oven in this unit is
designed for household use only.
Failure to follow these instructions could
result in exposure to excessive microwave
energy.
It is the customer's responsibility:
To contact a qualified electrical installer.
To assure that the electrical installation is
adequate and in conformance with National
Electrical Code, ANSI/NFPA 70 — latest edition*,
and all local codes and ordinances.
Copies of the standards listed may be obtained from:
* National Fire Protection Association
Batterymarch Park
Quincy, Massachusetts 02269