Related Manuals for Dikai DC800 Series
Summary of Contents for Dikai DC800 Series
- Page 1 DC800 Series Inkjet Printer User manual V1.0 Shanghai Dikai Coding Technology Co., LTD Add: Building No.1, SCI-TECH ONE, No. 489, Wenchuan Road, Baoshan District, Shanghai, 201906, PRC. DK 3.08 T240110A-02-CNSJ...
-
Page 3: Table Of Contents
User Manual DC800 Series DIKAI Summary General ........................... 5 Intro.......................... 5 Inspection ......................... 5 Warning........................6 Caution ........................6 Description ........................8 Parameter ........................ 8 Printer external dimensions ..................9 Nozzle appearance ....................11 Ink schematic ......................12 I/O interfaces and definitions .................. 13 Main interface...................... - Page 4 User Manual DC800 Series DIKAI Logo ........................ 36 Counter ......................36 Barcode ......................37 2D code ......................39 Shift code ......................40 External ......................41 Delete ........................42 Message parameter ....................42 Save and copy ....................... 44 Return ........................45 Graphics editing ......................
-
Page 5: General
General User Manual DC800 Series DIKAI General Intro Welcome to read the DC800 series CIJ printer user manual. This manual is provided for users of inkjet printers and contains the following contents： Overview－ Inkjet printer safety, risk information, technical information, including inkjet printing principle introduction. -
Page 6: Warning
General User Manual DC800 Series DIKAI local regulations. If the protective grounding cable is interrupted or broken, the device is in danger. Warning Warning Lethal voltage. When the device is connected to the power supply, there will be a fatal voltage. Unless it is absolutely... - Page 7 General User Manual DC800 Series DIKAI Stop quickly. After a quick stop, the printer should not stay in this state for too long, because the quick-drying ink will make restarting difficult. The device is damaged. Do not connect or remove any connector on the inkjet printer when it is powered on, otherwise it may damage the inkjet printer.
-
Page 8: Description
Description User Manual DC800 Series DIKAI Description Parameter DC810 Printer type 1-4 lines (7x5 dots) Print lines 34 dots 1-5 lines (5x5 dots) 5x5,7x5,9x6,12x8,12x12CH,16x11,16x16CH, Print font Upper and lower case English letters, Arabic numerals and common symbols, user-defined Printable characters, serial numbers, automatic dates, can... -
Page 9: Printer External Dimensions
Description User Manual DC800 Series DIKAI Printer external dimensions... - Page 10 Description User Manual DC800 Series DIKAI Notes：Ink cartridges and solvent cartridges are part of the equipment accessories, without which the printer will not operate.
-
Page 11: Nozzle Appearance
Description User Manual DC800 Series DIKAI Nozzle appearance... -
Page 12: Ink Schematic
Description User Manual DC800 Series DIKAI Ink schematic... -
Page 13: I/O Interfaces And Definitions
Description User Manual DC800 Series DIKAI I/O interfaces and definitions Encoder RS485 +15V 485-A Phase A 485-B Phase B Alarm light Red light signal Photocell 1 Yellow light signal +15V Green light signal Print signal +24V Photocell 2 +15V Bidirectional print signal... -
Page 14: Main Interface
Description User Manual DC800 Series DIKAI Main interface 1. System language 7. Scroll bar 13. Trigger switch 2. Login management 8. Counter resets 14. System information 3. Print massage index 9. Solvent margin 15. Parameter sets 4. System date time 10. -
Page 15: Keyboard Introduction
Description User Manual DC800 Series DIKAI Keyboard introduction Text input field Cursor move key Confirm key Case switch key Space key Delete key Language switch key Keyboard drop key... -
Page 16: Operation
Operation User Manual DC800 Series DIKAI Operation Turn on/off the printer Turn on the printer Follow these steps to start the printer: 1. Ensure that all cables and ground cables are properly connected. 2. Ensure that the power line is connected and powered on;... -
Page 17: Stop Printing
Operation User Manual DC800 Series DIKAI Quick boot is generally performed after 30 minutes of downtime to restart the operation, in order to reduce the waiting time. Step 1: Click the "Parameter" button on the left side of the screen;... -
Page 18: Login Management
Operation User Manual DC800 Series DIKAI 2. If the inkjet machine is not used for more than a week, after the normal startup operation is completed, log in to the administrator rights, and then enter the "Parameter "-" System Info "-" System Control" page, click the "... -
Page 19: System Language And Date Time
Operation User Manual DC800 Series DIKAI System language and date time System language Click the system language button on the main screen, click on the language list to select the system language you want, and the system language will take effect immediately (below left). -
Page 20: Massage Search And Preview
Operation User Manual DC800 Series DIKAI Massage search and preview Click the file name display area at the top of the main screen and the information list is displayed. Filename display area Displays the current file name. Information preview area Displays the information content in the file. This preview box updates in real time when switching information files. -
Page 21: Fault And Warning Information
Operation User Manual DC800 Series DIKAI Reset from zero Click the printing cumulative number area, the pop-up "Whether to reset the cumulative printing counter" dialog box, click the button , printing cumulative number of zero. Counter reset Reset the print content with the counter function in the current information, the pop-up the "Reset all counters"... - Page 22 Operation User Manual DC800 Series DIKAI If the nozzle cover is not installed and the high pressure screw is not tightened, the ink line will Nozzle cover continue to run but cannot print. If the icon is still is not installed displayed after the nozzle cover is closed, contact maintenance engineers.
-
Page 23: Running Parameter
Operation User Manual DC800 Series DIKAI Encoder speed is too high, it is difficult to achieve Printing speed the required printing width. If the width of the is too fast printed information incorrect, contact maintenance engineers. If fault information exists, click this icon to display all All faults fault information collections. -
Page 24: Parameter Setting
Operation User Manual DC800 Series DIKAI Fault log Record the fault information and time. You can export the logs to an external storage device through the USB serial port. Valve status Display the current status of all solenoid valves, click the... -
Page 25: Network Settings
Operation User Manual DC800 Series DIKAI the viscosity of the mixing cylinder ink through the solvent volatilization of the normal operation of the ink line. By adjusting the system parameters, the inkjet printer can have the optimal state under different production environments. The setting values are as follows. -
Page 26: File Management
Operation User Manual DC800 Series DIKAI File management Create message/logo file Step 1: In the corresponding message/logo option, click the new button to pop up the following dialog box; Step 2: Enter the new message name, click Enter button, that is, enter the... -
Page 27: Edit Message/Logo File
Operation User Manual DC800 Series DIKAI Step 3: After editing the required message content, press the Save button to save the current information. Tips: The message name can be English, numbers, and symbols. Use the key on the keyboard to switch case. - Page 28 Operation User Manual DC800 Series DIKAI How to confirm whether the format of the USB flash drive you use is FAT 32 format, perform the following operations: 1. Insert the USB drive into your computer; 2. After confirming that the computer recognizes the USB flash drive, enter My Computer (this computer);...
- Page 29 Operation User Manual DC800 Series DIKAI No: When printing to the last message of the file, the next printing will print the last message. Click the search button , search for the information file, enter the first letter/number of the name on the pop-up keyboard, automatically collapse the keyboard and match the existing information file, select the filtered information file to perform import/export operation.
-
Page 30: Fonts Management
Operation User Manual DC800 Series DIKAI When you click the text icon or graphic icon on the File Transfer screen, all text files or graphic files are displayed individually. Fonts management This menu function can add or delete the TTF format standard font library and custom font library (icon) in the device, the operation procedure is shown in File transfer. -
Page 31: Separator Setting
Operation User Manual DC800 Series DIKAI Step 2: Click "System Control" option; Step 3: Click the screensaver option to turn off the screensaver function. Tip: It is recommended that the screen saver be turned on. Separator setting Separator setting The system provides date separator and time separator Settings. By default, the date separator is “/”, and the time separator is“:”. -
Page 32: Field Editing
Field editing User Manual DC800 Series DIKAI Field editing Add field Toolbar Edit area Scrollbar Input area Position Module parameter setting adjustment area When entering the field editor interface for the first time, the field editor is in a blank state, and the field content is edited through the menu module of the field editor. -
Page 33: Create Other Language Text
Field editing User Manual DC800 Series DIKAI Create other language text Step 1: In the add text interface, click the keyboard "Lua" keyboard to pop up the dialog box; Step 2: Click the corresponding language option; Step 3: Press to confirm the selected language keyboard, press cancel keyboard switching;... -
Page 34: Date/Time
Field editing User Manual DC800 Series DIKAI Date/time Step 1: Click on the date/time module; Step 2: Click the Expand button in the date format/Time format menu to select the required format, and click the format to complete the selection;... -
Page 35: Expiry
Field editing User Manual DC800 Series DIKAI Time parameter setting Font selection: Available in 5x5, 7x5, 9x6, 12x8, 16x11, 19x14, 24x17. Time format: hh?mm?ss 24h, hh?mm?ss 12h, hh?mm?ss 12h AM/PM, hh 24h, hh 12h, hh 12h AM/PM, mm, hh?mm 24h, hh?mm 12h, hh?mm 12h AM/PM. -
Page 36: Logo
Field editing User Manual DC800 Series DIKAI MON, DAY, YY, WK, YYYYMMDD, DD?MM?YYYY, MM?DD?YYYY, DD?MM?YY. Valid days: The default is 0 days, which can be adjusted by the + - button, or by clicking the number directly. Note: "? "in the date format If it is a wildcard, click "Parameters - "System Info"... -
Page 37: Barcode
Field editing User Manual DC800 Series DIKAI Increase/Decrease: Click the button to switch increments or decrement, and count increments or decrement counts within the cycle. Reset counter: On the main interface, click the counter reset button and click the button in the pop-up confirmation box to reset all counters in the current printing information. - Page 38 Field editing User Manual DC800 Series DIKAI Template input It is often used to solve the "XXX..." used when editing bar codes and two-dimensional codes. While the actual printing content has a mixture of digital and English, resulting in the difference between the actual...
-
Page 39: 2D Code
Field editing User Manual DC800 Series DIKAI The types supported by the bar code module EAN 8, EAN 13, CODE 39, UPC, EAN128(GS1), CODE 128. Delete and exit To delete an added bar code module, press the Delete button on the interface to delete the selected bar code module. -
Page 40: Shift Code
Field editing User Manual DC800 Series DIKAI Delete and exit To delete an added bar code module, press the Delete button on the interface to delete the selected bar code module. Press the Return button to return to the upper-level menu without performing any operation. -
Page 41: External
Field editing User Manual DC800 Series DIKAI External Click "User Field" - "External" to add the external data module. The external data module is set as follows. External data source: TXT file imported from USB or real-time data of the RS485 port. -
Page 42: Delete
Field editing User Manual DC800 Series DIKAI last few bits of the data are intercepted. The maximum length is 100 characters. The differences between the 4 modes are as follows: Whether to Whether to use Queue or Overlay RS485 to... - Page 43 Field editing User Manual DC800 Series DIKAI Parameters Range Instructions The larger the value, the wider the print Character 0-1000 font is drawn, and the parameters are Width adjusted according to the actual effect. After triggering the printing action, the...
-
Page 44: Save And Copy
Field editing User Manual DC800 Series DIKAI Column 0-10 Number of repetitions per ink dot. Repeats The larger the value, the larger the Character spacing between the printing fonts, and Space parameters adjusted according to the actual effect. Toggle character inversion (upside down) -
Page 45: Return
Field editing User Manual DC800 Series DIKAI Return When the field file is saved or saved as, click the "back" button to exit the editing state, and the system returns to the main interface of the field editor. 。 When the field file in the edit is not saved, click the "back" button, and the... -
Page 46: Graphics Editing
Graphics editing User Manual DC800 Series DIKAI Graphics editing Main screen Toolbar Tracing area Edit area Scroll Trace arrow keys and confirm Handy tracing tool Operate Tracing point The default height of the logo editor is 34 points and the width is unlimited. -
Page 47: Handy Tracing Tool
Graphics editing User Manual DC800 Series DIKAI Handy tracing tool No fill rectangle strokes (left picture below): After pressing the button from the current position as the starting point, the stylus moves on the screen until it is released to form a non-fill trace point. Or from the current position as a starting point, click the anchor position of the next point to form a no fill trace point. - Page 48 Graphics editing User Manual DC800 Series DIKAI Straight line point: After pressing the button , from the current position as the starting point, the stylus moves on the screen until it is released to form a straight line tracing point (bottom left picture). Or take the current position as the starting point and click the anchor position of the next point to form a line trace point.
-
Page 49: System Setup And Configuration
System setup and configuration User Manual DC800 Series DIKAI System setup and configuration System setting Print setting Photocell level: Can select low-level trigger or high-level trigger. When the photoelectric sensor is used, the high-level trigger sensing the product is inkjet, the low-level trigger sensing the product is inkjet, and the low-level trigger is selected when the encoder or time mode continuous inkjet is used. -
Page 50: Advanced Setting
System setup and configuration User Manual DC800 Series DIKAI Time mode Print continuously at set intervals. Print continuously with the set unit of pulse interval of the Encode mode encoder. Print continuously at set print intervals. Calibration: When there is a difference between the actual... -
Page 51: Valve Testing And Calibration
System setup and configuration User Manual DC800 Series DIKAI Automatic logout Click this button to log out. Set account permissions It is an administrator operation right, which is used to manage user interface rights. Valve testing and calibration Solenoid valve test Click the switch button under any solenoid valve, and the solenoid valve will perform a switch valve operation to monitor whether the solenoid valve is normal. -
Page 52: System Control
System setup and configuration User Manual DC800 Series DIKAI System control The default startup and shutdown procedures are "Clean Start" and "Clean Stop". If the cleaning startup/cleaning stop procedure cannot be performed, the printer can be stopped by quickly turning on/cleaning the nozzle. -
Page 53: Factory Data Reset
System setup and configuration User Manual DC800 Series DIKAI clean the components. Factory data reset Enter "Parameter" - "Device Info", click "Reset" to restore factory Settings. Note: Back up your data before restoring factory Settings. -
Page 54: Maintenance
Maintenance User Manual DC800 Series DIKAI Maintenance Printer maintenance Maintenance schedule, the following table describes the cleaning and maintenance schedule: Time Mission Every week Check the nozzle and clean it if necessary. Clean the inkjet chassis. Every two weeks Check pipes and joints. -
Page 55: Cleaning
Maintenance User Manual DC800 Series DIKAI 3. Remove the nozzle cover. 4. If significant ink buildup is visible, clean the inside of the lid. 5. Check the inside of the nozzle and the nozzle cap for ink buildup. Cleaning is necessary. -
Page 56: Daily Troubleshooting
Maintenance User Manual DC800 Series DIKAI Ink and solution added Periodic - when indicated on the display. 1. Open the ink system compartment door as needed and replace with a new solvent cartridge (right) or ink cartridge (left). 2. Check that the number of the ink or solvent specified on the label is consistent with that used by the inkjet printer. - Page 57 Maintenance User Manual DC800 Series DIKAI D. If the field width is displayed too long, reduce the width value set in the Field Parameters menu. E. If the field width is displayed too short, increase the width value set in the Field Parameters menu.
- Page 58 Maintenance User Manual DC800 Series DIKAI Set the pressure correctly - re-enter Pressure is too low, ink droplet the pressure using the second-to-last deflection is excessive or inaccurate digit of the FIN number (usually 32). positioning. It is possible to lose the most deflected ink droplets.
Need help?
Do you have a question about the DC800 Series and is the answer not in the manual?
Questions and answers