SkyBean Chase XC User Manual

SkyBean Chase XC
generation of our original product, flying
behind pilot, developed
awesome videos or photos. Its body is
truly foldable without any assembly or
disassembly needed – it is ready to fly in
5 seconds! Just twist the tail!
Compatibility
Chase XC is produced in six versions:
 Universal with GoPro rail has integrated GoPro rail holder, what fits also for most of other
cameras. Therefore this version is fine if you haven't found specified one for your camera
 DJI Osmo Action 3-5 pro is made for 3, 4 and 5 models of this camera only.
 GoPro Hero Black 9-13 is made for GoPro 9, 10, 11, 12 and 13 Black cameras only.
 Insta360 X2, X3 and X4 models are made for these cameras only.
 UNI flat is an universal model compatible with all action cameras in weight range 50 – 200 g
Preparation for flight
Put camera into front cage, called head, secure it by white
silicone ring on 5 – 8 models and place it into its groove next
to the lens. 9 – 13 head version doesn't use white ring, as
top part of head is self-locking while tail is opened.
 Open/unfold – When Chase XC is facing to you, rotate
its tail counterclockwise until tail is fully opened. After
that, marks and arrows on octagonal tail body will be
symmetrical at top.
 Close/fold – When Chase XC is facing to you, rotate its
tail clockwise until tail is fully closed and carbon rods are
in parallel position.
 If you forget the direction of rotation to open/close,
arrows and marks representing opened/closed tail will
help you.

UNI versions setup: Attach adhesive camera mount to
flat front plate between arms on UNI flat model only. Put
camera into mount upside down to place camera's center
of gravity below aerodynamic axis, which runs through
½ Chase XC
user guide
is the next
to record
rev.2505