Advertisement
MT12-HW Installation Guide
MT12 Overview
The Cisco Meraki MT12 is wireless Bluetooth-enable sensor product. The MT12 is designed to be deployed
primarily in a networking environment (e.g., network closet) alongside Meraki equipment enabling the end-
user to receive alerts from the device specific to moisture and water leaks.
Package Contents and Wall Mount Hardware
In addition to the MT12, the following are provided:
Installation Instructions
Note: Each MT12 comes with an instruction insert within the box. This insert contains detailed step-by-
step guides and images to assist in the physical installation of the camera. A pdf can be found here.
(Note—this is a draft hyperlink not active yet.)
1
Advertisement
Table of Contents
Related Manuals for Cisco Meraki MT12-HW
Summary of Contents for Cisco Meraki MT12-HW
- Page 1 MT12-HW Installation Guide MT12 Overview The Cisco Meraki MT12 is wireless Bluetooth-enable sensor product. The MT12 is designed to be deployed primarily in a networking environment (e.g., network closet) alongside Meraki equipment enabling the end- user to receive alerts from the device specific to moisture and water leaks.
-
Page 2: Power Options
Note: During first time setup, the MT12 will automatically update to the latest stable firmware. Some features may be unavailable until this automatic update is completed. This process may take up to 10 minutes due to enabling of whole disk encryption. Wall Mount Hardware Setup The MT12 has multiple options for mounting to a surface. -
Page 3: Pre-Install Preparation
Pre-Install Preparation You should complete the following step before starting to configure the device which is to attach the MA- CBL-LEAK-1 cable to the device as shown below. Examples of Placement Locations Here are some examples of where the MT12 can be setup and placed in a networking environment. -
Page 4: Dns Configuration
Configure your MT12 in the Networking using Dashboard The following is a brief overview only of the steps required to add a MT12 to your network. For detailed instructions about creating, configuring, and managing Meraki IoT networks, refer to the online ( https://documentation.meraki.com/MT). -
Page 5: Assigning Ip Addresses
Assigning IP Addresses At this time, the MT12 does not support static IP assignment. MT12 units must be added to a subnet that uses DHCP and has available DHCP addresses to operate correctly. Login to Meraki Dashboard Login to dashboard.meraki.com Technical Specifications Operational Temperature -18ºC to 55ºC degrees... -
Page 6: Regulatory Statements
FCC Caution Any changes or modifications not expressly approved by Cisco Systems, Inc. could void the user’s authority to operate this equipment. This Transmitter must not be co-located or operation in conjunction with any other antenna or transmitter. - Page 7 Industry Canada Statement This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
- Page 8 Statement CS-0438 - 台灣 RoHS 台灣RoHS“限用物質含有情況標示聲明書”網址 www.cisco.com/go/taiwanrohs Statement CS-0438 - Taiwan RoHS Taiwan RoHS “Restricted Substances Content Disclosure Table” web address www.cisco.com/go/taiwanrohs...
Need help?
Do you have a question about the Meraki MT12-HW and is the answer not in the manual?
Questions and answers