3. SETTING UP THE APPLIANCE Before using the appliance, always read the safety warnings. When used for the first time, the internal circuits of the appli- 1. DESCRIPTION ance must be rinsed as follows: 1. Plug into the mains socket. The appliance runs a self-diag- 1.1 Description of appliance - A nosis cycle, indicated by the sequential flashing of all the A1.
• While the appliance is making coffee, delivery can be in- Programmable quantity terrupted at any moment by pressing the coffee button pressed previously. maximum 90 ml • At the end of delivery (within 3 seconds), to increase the amount of coffee in the cup, press and hold the coffee but- maximum 160 ml ton pressed previously.
You should not deliver steam for more than 4. The light will blink during the hot water 60 seconds. erogation. 5. To stop the flow of hot water, turn the dial to “○”. 5.1 Preparing hot milk You should not deliver hot water for more To prepare hot, unfrothed milk, follow the instructions listed than 60 seconds.
9.2 Cleaning the coffee filters • After 1 minute of inactivity, the machine automatically exits the settings menu and is ready for use. The coffee filters are designed to achieve the best possible coffee froth. To keep them efficient, they must always be kept clean and DEFAULT COFFEE QUANTITY (RESET) free of any coffee residue.
), press the but- ton for 10 seconds, first the orange light then the white light will Descaler ECODECALK www.delonghi.com flashes to indicate that the descaling alarm is resetted. Container Capacity 1 L Before making coffee please clean the machine throughtly, the drip tray and the hot water/steam dispenser.
12. EXPLANATION OF INDICATOR LIGHTS Lights Meaning Solution The appliance is plug into the mains The appliance performs a self-diagnosis socket cycle, indicated by sequential flashing of the lights The ON/OFF (B1) button is turned on Flashing lights: the appliance is heating Lights on steadily: the appliance is ready Steam dial open Close the steam dial...
Page 12
Problem Cause Solution The espresso crema is too light The pre-ground coffee is not tamped Tamp the pre-ground coffee more firmly down firmly enough There is not enough pre-ground coffee Increase the quantity of pre-ground coffee The pre-ground coffee is too coarse Use only pre-ground coffee for espresso coffee makers The wrong type of pre-ground coffee is...
Need help?
Do you have a question about the EM450 and is the answer not in the manual?
Questions and answers