Advanced Disc Operations; Programming The Playing Order-Program Play - JVC MX-KC58 Instructions Manual

Numeric
keys
4
CD1-CD3
REPEAT
PROGRAM
RANDOM
Programming the Playing Order—Program Play
You can arrange the playing order of the tracks (up to 32)
before you start playback.
• You can repeat all the programmed tracks by pressing
REPEAT.
• During the PRGM indicator is shown on the display, you
cannot open the disc trays.
1
Before starting playback, press PROGRAM.
2
Select a disc by pressing CD 1–CD 3.
3
Select tracks you want for Program Play.
Disc number
Track
number
21

Advanced Disc Operations

¢
CD1-CD3
7
CD 6
MP3/WMA
MODE
Program step
See "How to Select Numbers" on page 9.
• To use 4/¢ on the main unit, press SET/RESUME
after selecting tracks.
4
Repeat steps 2 and 3 to program the other tracks.
• To select a track from the same disc, repeat step 3.
5
Start playback.
The tracks you have selected are
played back in the order you
have programmed.
To skip a track:
• Tracks cannot be selected with the numeric keys during
Program Play.
CD Open/
Close 0
DISC SKIP
CANCEL/DEMO
SET/RESUME
CD 6
¢
REPEAT
PROGRAM
RANDOM
7
4
To pause: To stop:
To release,
press again.