Restarting The Drm Instance; Setting Custom Configuration In The Console; Verifying The Drm Migration - Red Hat SYSTEM 8.0 - MIGRATION GUIDE 7.X TO 8.0 Manual

5.5. Restarting the DRM Instance

1. Restart the Directory Server and Administration Server for the Certificate System 8.0 instance.
service dirsrv start
service dirsrv-admin start
2. Start the DRM instance.
service new_DRM_instance start

5.6. Setting Custom Configuration in the Console

Use the Console to configure any custom behavior of the different subsystems, such as customized
plug-ins, logging, and auditing. A subsystem may have to be restarted once all configuration changes
have been applied.

5.7. Verifying the DRM Migration

After migrating the 8.0 DRM instance, open the DRM agent services pages for the 8.0 instance to
ensure that everything is working properly. For example:
https://server.example.com:10443/kra/agent/kra
Then log into the DRM Console and verify that the new server can be managed through the Console.
pkiconsole https://server.example.com:10445/kra
The port numbers for the agent services interfaces can be found in the server.xml in the conf/
directory for the 8.0 DRM.
Restarting the DRM Instance
61