Page 3
Equipment used in illustrations (not supplied) 그림에 사용된 장비(별매품) Front speaker Subwoofer 전면 스피커 서브우퍼 Power amplifier Rear speaker 전원 앰프 후면 스피커 from car antenna (aerial) 자동차 안테나에서 연결 Fuse (10 A) Speaker impedance: 4 – 8 ohms × 4 퓨즈(10 A) RCA pin cord (not supplied).
Page 4
Face the hook inwards. 고리가 안쪽으로 가도록 합니다.
Page 5
182 mm (7 53 mm (2 Catch 걸쇠 Claws 갈고리 Dashboard 계기판 Fire wall 방화벽 ...
Page 6
TOYOTA size 5 × max. 8 mm × max. 크기 5 × 8 mm 최대 to dashboard/center console 계기판/중앙 콘솔에 장착 Bracket 브래킷 size 5 × max. 8 mm × max. 크기 5 × 8 mm 최대 Bracket 브래킷...
Page 7
Front panel release button 전면 패널 해제 버튼 Fuse (10 A) 퓨즈(10 A)
English Cautions This unit is designed for negative ground (earth) 12 V DC operation only. Do not get the leads under a screw, or caught in moving parts (e.g. seat railing). Before making connections, turn the car ignition off to avoid short circuits.
Connection diagram ( To a metal surface of the car First connect the black ground (earth) lead, then connect the yellow, and red power supply leads. To the power antenna (aerial) control lead or power supply lead of antenna (aerial) booster Notes It is not necessary to connect this lead if there is no power antenna (aerial) or antenna (aerial) booster, or with a manually-operated...
English Precautions Choose the installation location carefully so that the unit will not interfere with normal driving operations. Avoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperatures, such as in direct sunlight or near heater ducts. Use only the supplied mounting hardware for a safe and secure installation.
( 갈고리 You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. Note To prevent malfunction, install only with the supplied screws . How to detach and attach the...
Need help?
Do you have a question about the CDX-GT520U and is the answer not in the manual?
Questions and answers