Running The Import - Red Hat NETWORK SATELLITE SERVER 3.6 Installation Manual

Chapter 6. Importing and Synchronizing
6. This sample command assumes the administrator wants to copy the contents of the CD/ISO
(mounted in
/mnt/import
cp -ruv /mnt/import/* /var/rhn-sat-import/
7. Then unmount
umount /mnt/import/
8. Repeat these steps for each Content CD or ISO of every channel to be imported.

6.2.3. Running the Import

The
rhns-satellite-tools
package, channel, and errata imports and synchronizations.
The following process assumes in the previous step the user has copied all data to
/var/rhn-sat-import
Note
The trailing backslash (
safely be omitted. Long versions of all options are used in the examples for clarity. You may use short
versions where available.
The first step in importing channels into the database is listing the channels available for import. This
is accomplished with the command:
satellite-sync --list-channels --mount-point /var/rhn-sat-import
The next step is to initiate the import of a specific channel. Do this using a channel label presented in
the previous list. The command will look like:
satellite-sync -c rhel-i386-as-3 --mount-point /var/rhn-sat-import
Note
Importing package data can take up to two hours per channel. But you may begin registering sys-
tems to channels as soon as they appear in the RHN Satellite Server's website. No packages are
necessary for registration, although updates cannot be retrieved from the Satellite until the channel
is completely populated.
You may repeat this step for each channel or include them all within a single command by passing
each channel label preceded by an additional
satellite-sync -c channel-label-1 -c channel-label-1 --mount-point /var/rhn-sat-import
This conducts the following tasks in this order:
1. Populating the tables describing common features for channels (channel families). This can
also be accomplished individually by passing the
satellite-sync
) into
/var/rhn-sat-import/
in preparation for the next CD or ISO:
/mnt/import
package provides the
.
) in all subsequent command examples is a continuation character; it may
\
.
satellite-sync
flag, like so:
-c
--step=channel-families
:
program for managing all
37
option to