Red Hat NETWORK SATELLITE SERVER 3.6 Installation Manual page 38

34
Option
Option
,
-h --help
,
-d= --db=DB
,
-m= --mount-point=MOUNT_POINT
--list-channels
,
-c= --channel=CHANNEL_LABEL
-p, --print-configuration
--no-ssl
--step=STEP_NAME
--no-rpms
--no-packages
--no-errata
--no-kickstarts
--force-all-packages
--cache-refresh-level=LEVEL_NUMBER
--debug-level=LEVEL_NUMBER
--email
--traceback-mail=TRACEBACK_MAIL
,
-s= --server=SERVER
--http-proxy=HTTP_PROXY
--http-proxy-username=HTTP_PROXY_USERNAME
--http-proxy-password=HTTP_PROXY_PASSWORD
Chapter 6. Importing and Synchronizing
Description
Description
Display this list of options and exit.
Include alternate database connect string:
username/password@SID.
Import/sync from local media mounted to the
Satellite. To be used in closed environments (such as
those created during disconnected installs).
List all available channels and exit.
Process data for this channel only. Multiple channels
can be included by repeating the option. If no
channels are specified, all channels on the Satellite
will be freshened.
Print the current configuration and exit.
Not Advisable - Turn off SSL.
Perform the sync process only to the step specified.
Typically used in testing.
Do not retrieve actual RPMs.
Do not process full package data.
Do not process Errata information.
Do not process kickstart data (provisioning only).
Forcibly process all package data without conducting
a diff.
The level of caching refresh for the Satellite, 0-6.
Refer to Section 6.1.3 Import/Sync Cache Refresh for
a complete description.
Override the amount of messaging sent to log files
and generated on the screen set in
/etc/rhn/rhn.conf
Email a report of what was imported/synchronized to
the designated recipient of traceback email.
Direct sync output (from
address.
Include the hostname of an alternative server to
connect to for synchronization.
Add an alternative HTTP proxy server in the form
hostname:port.
Include the username for the alternative HTTP proxy
server.
Include the password for the alternative HTTP proxy
server.
, 0-6 (2 is default).
) to this email
--email