Creating Groups - Red Hat NETWORK 4.1.0 Reference Manual

Chapter 6. Red Hat Network Website
System Group Details page. Refer to Section 6.4.3.3 System Group Details —
more information.
The status icons call for differing degrees of attention:
— All systems within group are up-to-date
•
— Critical Errata available, update strongly recommended
•
— Updates available and recommended
•
Group Name — The name of the group as configured during its creation. The name
•
should be explicit enough to easily differentiate between it and other groups. Clicking
on the name of a group takes you to Details tab of its System Group Details page. Refer
to Section 6.4.3.3 System Group Details —
Systems — Total number of systems contained by the group. Clicking on the number
•
takes you to the Systems tab of the System Group Details page for the group. Refer to
Section 6.4.3.3 System Group Details —
Use in SSM — Clicking the Use Group button in this column loads the group
•
from that row and launches the System Set Manager immediately. Refer to
Section 6.4.4 System Set Manager —

6.4.3.1. Creating Groups

To add a new system group, click the create new group button at the top-right corner of
the page. Type a name and description and click the Create Group button. Make sure you
use a name that clearly sets this group apart from others. The new group will appear in the
System Groups list.
6.4.3.2. Adding and Removing Systems in Groups
Systems can be added and removed from system groups in two places: the Target Systems
tab of the System Group Details page and the Groups tab of the System Details page.
The process is similar in both instances. Select the systems to be added or removed and
click the Add Systems or Remove Systems button.
for more information.
for more information.
for more information.
99
for