Scheduled Actions - Red Hat NETWORK BASIC - USER REFERENCE GUIDE 3.3 User Reference Manual

Chapter 6. Red Hat Network Website
1. Select Channels and Packages => Channel List from the left navigation bar.
2. Click on the name of the channel that contains the package(s) that you want to download.
3. Select the Package List tab.
4. Select the package(s) to download from the Select column.
5. Click the Download Selected Packages button.
6. Confirm the action.
After choosing to download the package(s) using one of these methods, you will be presented with a
confirmation page as shown in Figure 6-5. If you selected a package that is available for more than one
architecture, you need to select an architecture for the package. For example, if you want to download
package you will need to choose between i386, i586, and i686. Click the Download
the
kernel
Selected Packages Now! button to start downloading the package(s).
The package are downloaded into a directory called
selected after clicking the button. For example, if you want to save the package(s) in the direc-
tory,
/downloads/rhn-packages
will be created for you if it does not already exist.
rhn-packages
Figure 6-5. Package Download
Even if you selected to download more than one package, you will only download one file. This one
TAR file contains the RPM package(s) you selected. To extract the packages from the TAR file, open
a shell prompt (such as an XTerm or GNOME terminal), change to the
issue the command:
tar -xvf rhn-packages.tar
The next step is to install the packages manually. Refer to Section 4.7 for details.

6.7. Scheduled Actions

An action is a scheduled RHN task that is to be performed on one or more client systems. For example,
an action can be scheduled to apply all Errata Updates to a system.
rhn-packages
, select the directory
/downloads
beneath the current directory
when prompted. The directory
directory, and
rhn-packages
67