Satellite Server Preparation/Configuration - Red Hat NETWORK 4.0 Reference Manual

174
8.2. Satellite Server Preparation/Configuration
Before configuring the UNIX clients, you will need to enable UNIX support. This can be
accomplished one of two ways, depending on whether you have yet installed your Satellite
server:
1. During the Satellite installation:
Enable UNIX support on the Satellite by checking the "Enable Solaris Support" box
during the installation process, as pictured:
Figure 8-1. Enabling UNIX Support During Satellite Installation
2. After the Satellite has been installed:
Enable UNIX support by configuring the Satellite after it has been installed. To do
so, select Satellite Tools in the top menubar, then select Satellite Configuration in
Chapter 8. UNIX Support Guide