Red Hat NETWORK 4.0 Reference Manual page 108

92
Figure 6-8. System Group List
The System Groups list contains several columns for each group:
Select — These checkboxes enable you to add systems in groups to the System Set
•
Manager. To select groups, mark the appropriate checkboxes and click the Update
button below the column. All systems in the selected groups are added to the System
Set Manager. You can then use the System Set Manager to perform actions on them
simultaneously. It is possible to select only those systems that are members of all of the
selected groups, excluding those systems that belong only to one or some of the selected
groups. To do so, select them and click the Work with Intersection button. To add all
systems in all selected groups, select them and click the Work with Union button. Each
system will show up once, regardless of the number of groups to which it belongs. Refer
to Section 6.4.4 System Set Manager —
Status — Shows which type of Errata Alerts are applicable to the group or confirms
•
that it is up-to-date. Clicking on a group's status icon takes you to the Errata tab of its
System Group Details page. Refer to Section 6.4.3.3 System Group Details —
more information.
The status icons call for differing degrees of attention:
Chapter 6. Red Hat Network Website
for details.
for