Red Hat NETWORK 4.1.0 - CLIENT Configuration Manual page 11

Chapter 2. Client Applications
Figure 2-1. Red Hat Update Agent GUI Configuration
Make sure you enter the domain name of your RHN Satellite Server or RHN
Proxy Server correctly. Entering an incorrect domain or leaving the field blank
may prevent
up2date --configure
however, by editing the value in the
Section 2.2.3 Updating the Configuration Files Manually for precise instructions.
Warning
Systems running Red Hat Enterprise Linux 3 or newer have registration functionality built
into the Red Hat Update Agent and therefore do not install the Red Hat Network Regis-
tration Client. Systems running Red Hat Enterprise Linux 2.1 (and versions of Red Hat
Linux prior to 8.0) must reconfigure and use the Red Hat Network Registration Client,
as well as the Red Hat Update Agent.
To reconfigure the Red Hat Network Registration Client, perform an almost identical set
of steps. As root, run the following command:
from launching. This may be resolved,
configuration file. Refer to
up2date
7