Using The 2.2.3. Updating The Configuration Files Manually - Red Hat NETWORK 4.1.0 - CLIENT Configuration Manual

6 Chapter 2. Client Applications
2.2.2. Using the Option
--configure
Both the Red Hat Network Registration Client and the Red Hat Update Agent that ship
with Red Hat Enterprise Linux provide interfaces for configuring various settings. For full
listings of these settings, refer to the chapters dedicated to the applications in the RHN
Management Reference Guide.
Each application offers a graphical user interface (GUI) for configuration that enables you
to change the settings required by RHN Proxy Server or RHN Satellite Server. The GUI
requires that the client system run the X Window System. The command to launch the GUI
configuration interface will look like:
application_filename --configure
To reconfigure the Red Hat Update Agent, issue the following command as root:
up2date --configure
You are presented with a dialog box offering various settings that may be
General
reconfigured. In the tab, under
Select a Red Hat Network
replace the default value with the fully qualified domain
Server to use
name (FQDN) of the RHN Satellite Server or RHN Proxy Server, such as
https://your_proxy_or_sat.your_domain.com/XMLRPC. Retain the
at the end. When finished, click OK.
/XMLRPC