Table of Contents
Advertisement
Parameters for Resource Limits
The following parameters are used to provide information about resource limits:
•
Parameter for Binder-Based Resource Limits
•
Status Codes for Resource Limits
Parameter for Binder-Based Resource Limits
The following parameter is a valid value for the
function.
Parameter ID
SLAPI_RESLIMIT_TYPE_INT
Status Codes for Resource Limits
The status codes are used with functions that extract attribute values from a binder
entry that corresponds to resource limits. Typically, operational attributes are used
to hold binder-specific search size limits.
Any resource limits found in the binder entry are cached in the connection
structure by a connection object extension. This means that if the attributes that
corresponds to the binder entry is changed, the resource limit is not effected until
the next bind occurs as that entry.
The status codes are the possible return values for the
slapi_reslimit_register()
functions. A plug-in or server subsystem that wants to use the resource limit
subsystem should call the
each limit to be tracked. Note that
before any client connections are accepted.
Parameters for the Virtual Attribute Service
The parameters listed in the tables below are used with the virtual attribute service
to return information about virtual and real attributes.
Data Type
Description
Valid values for the type parameter for
int
slapi_reslimit_register().
and
slapi_reslimit_get_integer_limit()
slapi_reslimit_register()
slapi_reslimit_register()
Parameters for Resource Limits
slapi_reslimit_register()
plug-in function once for
should be called
Chapter 16
Parameter Block Reference
593
Advertisement
Table of Contents
