Parameters For The Search Function; Parameters Passed To The Search Function - Netscape DIRECTORY SERVER 6.1 - PLUG-IN Manual

Parameter ID
SLAPI_BIND_RET_SASLCREDS
SLAPI_BIND_SASLMECHANISM
See "Processing an LDAP Bind Operation" on page 78 for more information on
these parameters.

Parameters for the Search Function

The following parameters are used with the search function:
•

Parameters Passed to the Search Function

• Parameters for Executing the Search
• Parameters for the Search Results
Parameters Passed to the Search Function
The following table lists the parameters in the parameter block passed to the
database search function. If you are writing a pre-operation, database, or
post-operation search function, you can get these values by calling the
slapi_pblock_get()
Parameter ID
SLAPI_SEARCH_TARGET
Data Type
struct berval *
char *
function.
Data Type Description
DN of the base entry in the search operation (the
char *
starting point of the search).
Parameters for the Search Function
Description
Simple Authentication and Security Layer
(SASL) credentials that you want to send
back to the client. (Set this before calling
slapi_send_ldap_result().)
Simple Authentication and Security Layer
(SASL) mechanism that is used (for
example, LDAP_SASL_EXTERNAL).
Chapter 16 Parameter Block Reference 573