Enabling The Diop Feature In Directory Server - Netscape DIRECTORY SERVER 6.1 - PLUG-IN Manual

Use Netscape Console to create a new/second instance of Directory Server
7.
(
In the navigation pane, select the Server Group, right click, and select "Create
Instance of Netscape Directory Server," and follow the prompts.
Disable the unsupported plug-ins in the second instance
8.
(
a.
b.
c.
Use the second instance to enable the DIOP feature, which is explained in the
9.
next section.

Enabling the DIOP Feature in Directory Server

For a Directory Server instance to support the DIOP feature, its default
configuration needs to be modified—the server needs to be configured to use the
null DN or the root suffix in the server. This can be done by adding the following
entry to the
DIOP feature:
dn: cn="",cn=mapping tree,cn=config
objectClass: top
objectClass: extensibleObject
objectClass: nsMappingTree
cn: ""
nsslapd-state: container
You can modify the
• By editing the
a.
slapd-<diopInstance>
slapd-<diopInstance>
In Netscape Console, locate and double-click the entry for the second
instance of Directory Server.
This opens the Directory Server Console for the second instance.
Select the Configuration tab, and expand Plugins.
Disable each of these plug-ins listed in Table 13-1 on page 156.
To disable a plug-in, select the plug-in and then on the right panel,
uncheck the "Enable the Plugin" option. Note that some plug-ins may
depend on other plug-ins, and you may see messages that reflect such a
dependency.
file of the server instance in which you want to enable the
dse.ldif
dse.ldif
dse.ldif
Shut down your Directory Server.
<server_root>/slapd-<diopInstance>/stop-server
in Figure 13-1).
), which you will use for enabling the DIOP plug-in.
in either of the following ways:
file directly:
Chapter 13
Enabling the DIOP Feature in Directory Server
Using Data Interoperability Plug-Ins 161