Configuring The Aix Snmp Daemon - Netscape DIRECTORY SERVER 6.01 - ADMINISTRATOR Administrator's Manual

Setting Up SNMP
On AIX machines, configure the AIX SNMP Daemon.
2.
See "Configuring the AIX SNMP Daemon," on page 418 for information.
Enable the directory subagent.
3.
See "Configuring SNMP for the Directory Server," on page 420 for
information.
Start the directory subagent.
4.
See "Starting and Stopping the SNMP Subagent on UNIX," on page 419 for
information.

Configuring the AIX SNMP Daemon

If your SNMP daemon is running on AIX, it supports SMUX. For this reason, you
do not need to install a master agent. However, you need to change the AIX SNMP
daemon configuration.
AIX uses several configuration files to filter its communications. One of them,
snmpd.conf
messages from the SMUX subagent. For more information, see the online manual
page for
For example, you might add this line to the
smux 1.3.6.1.4.1.1.1450.7 "" IP_address net_mask
where IP_address is the IP address of the host the subagent is running on, and
net_mask is the network mask of the host.
NOTE
If you need more information, see your related system documentation.
418 Netscape Directory Server Administrator's Guide • January 2002
, needs to be changed so that the SNMP daemon accepts the incoming
. You need to add a line to define each subagent.
snmpd.conf
Do not use the loopback address 127.0.0.1; use the real IP address
instead.
:
snmpd.conf