Netscape DIRECTORY SERVER 6.01 - ADMINISTRATOR Administrator's Manual page 297

Repeat these steps for every read-only replica in your replication configuration.
Configuring the Read-Write Replicas on the
Supplier Servers
Perform these steps on each supplier server:
On Server A and Server B, specify the supplier settings for each server.
1.
In the Directory Server Console, click the Configuration tab.
a.
In the navigation tree, highlight the Replication node.
b.
In the right-hand side of the window, click the Supplier Settings tab.
c.
Check the Enable Change Log checkbox.
d.
This activates all of the fields in the pane below that were previously
greyed out.
Specify a change log by clicking the Use Default button, or click the Browse
e.
button to display a file selector.
Set the change log parameters (number and age).
f.
You must clear the unlimited checkboxes if you want to specify different
values.
Click Save to save the supplier settings.
g.
Create the entry corresponding to the supplier bind DN, if it does not exist. For
2.
multi-master replication, it is necessary to create this supplier bind DN on the
supplier servers (as well as the consumers), because they act as both consumer
and supplier to the other supplier servers.
In the Directory Server Console, click the Directory tab, and create an
a.
entry. For example you could use
Specify a
b.
userPassword
If you have enabled the password expiration policy, or intend to do so in
c.
the future, you must remember to disable it to prevent replication from
failing due to passwords expiring. To disable the password expiration
policy on the
attribute with a value of 20380119031407Z which means that the password
will never expire.
cn=Replication Manager,cn=config
attribute-value pair.
attribute, add the
userPassword
Configuring Multi-Master Replication
passwordExpirationTime
Chapter 8 Managing Replication
.
297