Related Manuals for Sony ECM-TL3
Summary of Contents for Sony ECM-TL3
- Page 1 4-273-321-21(1) Electret Condenser Microphone Operating Instructions/Mode d’emploi/ Manual de instrucciones/Bedienungsanleitung/ Gebruiksaanwijzing/Istruzioni per l’uso ©2011 Sony Corporation Printed in China ECM-TL3...
- Page 2 (PLUG IN POWER) ...
-
Page 3: How To Use
English Electret Condenser Microphone Before operating the unit, please read this manual thoroughly and retain it for future reference. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic... -
Page 4: Troubleshooting
Troubleshooting No sound, unable to record The connected recorder is not a plug-in-power supply system device. Connect the microphone to a plug-in-power supply system device. Check with the operating instructions of the connected device. The connected recorder is a monaural device. Use a PC-236MS stereo-monaural converter plug (sold separately). The microphone is connected to the headphone jack. Connect the microphone to the microphone jack. No sound, noisy sound The plug does not fit properly. Wipe the plug with a soft cloth. ... - Page 5 Precautions This microphone is a precision instrument. Never disassemble it. Do not expose the microphone to a mechanical shock such as by dropping or striking it. If the microphone is placed near speakers/headphones, a high pitched noise may be heard (howling effect). This is caused by the microphone catching sound from the speakers/ headphones repeatedly. In this case, place the microphone as far as possible from the speakers/ headphones. Do not leave the microphone in a humid, dusty or hot place, or under direct sunlight. This may cause a malfunction. When using outdoors, never let the microphone become wet with rain or saltwater. When the microphone and the plug become dirty, wipe them with a dry cloth. Do not blow on the microphone when dusting it. A dirty plug will cause deterioration of sound quality and intermitted sound.
Need help?
Do you have a question about the ECM-TL3 and is the answer not in the manual?
Questions and answers