Red Hat LINUX 7.2 Reference Manual page 313

Section A.2:CD-ROM Module Parameters
In the following tables, most modules listed without any parameters can either be auto-probed to find
the hardware or they require you to manually change settings in the module source code and recompile.
Table A–1 Hardware Parameters
Hardware
ATAPI/IDE CD-ROM Drives
Aztech CD268-01A, Orchid
CD-3110, Okano/Wearnes
CDD110, Conrad TXC,
CyCDROM CR520,
CyCDROM CR540 (non-IDE)
Sony CDU-31A CD-ROM
Philips/LMS CDROM drive
206 with cm260 host adapter
card
Goldstar R420 CD-ROM
ISP16, MAD16, or Mozart
sound card CD-ROM
interface (OPTi 82C928
and OPTi 82C929) with
Sanyo/Panasonic, Sony, or
Mitsumi drives
Mitsumi CD-ROM, Standard
Mitsumi CD-ROM,
Experimental
Optics storage 8000 AT
"Dolphin" drive, Lasermate
CR328A
Parallel-Port IDE CD-ROM
SB Pro 16 Compatible
Module
aztcd.o
cdu31a.o
cm206.o
gscd.o
isp16.o
mcd.o
mcdx.o
optcd.o
pcd.o
sbpcd.o
Parameters
hdX=cdrom
aztcd=io_port
cdu31a=io_port,IRQ OR
cdu31a_port=base_addr
cdu31a_irq=irq
cm206=io_port,IRQ
gscd=io_port
isp16=io_port,IRQ,dma, drive_type
OR isp16_cdrom_base=io_port
isp16_cdrom_irq=IRQ
isp16_cdrom_dma=dma
isp16_cdrom_type=drive_type
mcd=io_port,IRQ
mcdx=io_port_1,IRQ_1,
io_port_n,IRQ_n
sbpcd=io_port
313