Page 1
Model No. / 型號 / 型号: SA0160 PN: 03SA016000000 Rev B 【EN】 Hereby, Creative Labs Pte. Ltd. declares the Bluetooth Audio Transmitter, model no. SA0160 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at http://www.creative.com/EUDoC...
Page 2
Press and hold for 5s to perform Master Reset. Device LED will flash in red, then revert to Bluetooth Pairing mode. Creative BT-W3 will revert to the last codec used upon exiting HFP mode, or when plugged into an available USB port after device removal.
Follow the instructions on-screen com/support/BTW3. Follow the instructions on-screen firmware available on creative.com/support/BTW3. Please note that HFP-off firmware will disable the HFP function on your Creative BT-W3. To enable HFP mode again, install the HFP-on firmware available on creative.com/support/BTW3. to install the firmware...
Technical Specification Operating Frequency: 2402–2480 MHz Wireless Technology: Bluetooth 5.0 Bluetooth Profiles: - A2DP (Wireless stereo Bluetooth) - AVRCP (Bluetooth remote control - HFP (Hands-Free Profile) Audio Codec : SBC, aptX, aptX Low Latency, aptX HD Operating Range: Up to 30m / 100 ft (unobstructed line-of-sight) Operating Temperature: 0–45°C Max.
Page 5
® are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice.
Need help?
Do you have a question about the BT-W3 and is the answer not in the manual?
Questions and answers