Red Hat GFS 6.1 Administrator's Manual page 32

18
Note
If you are installing the GFS RPMs, you must install Red Hat Cluster Suite before Red
Hat GFS.
3.1.2.1. Determining RPMs To Install
Determining which RPMs to install is based on the following criteria:
The lock manager Red Hat Cluster Suite is using — either DLM or GULM
•
The Red Hat Cluster Suite and Red Hat GFS functions you are using (besides the stan-
•
dard functions)
Whether to include development libraries
•
The type of kernel (or kernels) is installed
•
Use the following tables for determining which RPMs to install:
Table 3-1 — For Red Hat Cluster Suite with DLM
•
Table 3-2 — For Red Hat Cluster Suite with GULM
•
Table 3-3 — For Red Hat GFS
•
The tables contain the following information to assist you in determining which packages
to install:
RPMs — The names of the RPMs (excluding revision numbers)
•
Inclusion — The tables provide the following information about whether an RPM should
•
be included in the installation:
Req: Required RPM — You must install the RPM.
•
Opt: Optional RPM — Refer to the "Purpose" for more information about determining
•
whether to include the RPM.
Dev: Development RPM — Used for development purposes. Refer to the "Purpose"
•
for more information about determining whether to include the RPM.
Purpose — Provides a concise description of the RPM purpose. Assists in determining
•
which RPMs to include other than the required RPMs.
Chapter 3. Installing GFS