Onkyo DAC-HA200 Instruction Manual
Onkyo DAC-HA200 Instruction Manual

Onkyo DAC-HA200 Instruction Manual

Hide thumbs Also See for DAC-HA200:

Advertisement

Quick Links

D/A Converter/Headphones Amplifier
DAC-HA200
"Made for iPod, " "Made for iPhone, " and "Made for iPad" mean that an electronic
accessory has been designed to connect specifically to iPod, iPhone, or
iPad, respectively, and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance.
Apple, Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S.
and other countries.
Android is a trademark of Google Inc.
Microsoft, Windows and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
Other company names and product names in this document are the trademarks
or registered trademarks of their respective owners.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
● DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE
ELECTRONICS. NO USER SERVICEABLE PARTS ARE INSIDE.
● IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT THE
STORE WHERE YOU PURCHASED THE UNIT FOR A SERVICE REFERRAL. DO
NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.
● USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DAC-HA200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Onkyo DAC-HA200

  • Page 1 D/A Converter/Headphones Amplifier Instruction Manual DAC-HA200 “Made for iPod, ” “Made for iPhone, ” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.
  • Page 2 CAUTION Changes or modifications to this equipment not expressly approved by Onkyo Corporation for compliance will void the user’s warranty. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 3: Included Accessories

    - Limits for harmonic current emissions - Limitation of voltage changes, voltage fluctuations and flicker - RoHS Directive, 2011/65/EU - Hereby, Onkyo Corporation, declares that this DAC-HA200 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
  • Page 4: Placement Precautions

    Placement precautions ● Do not put anything on top of the unit. ● Avoid placing the unit in direct sunlight or close to any source of heat, such as a radiator, heater, open fireplace or amplifier. Also avoid locations that are subject to vibrations or exposed to excessive dust, cold or moisture.
  • Page 5 GAIN switch Use this to change the output level to suit the headphones that you are using. H: high output level L: low output level Lower the volume before setting this switch to H. CAUTION Particularly when using headphones for the first time with this unit, set the GAIN switch to L and be sure to raise the volume gradually during playback to check the sound pressure sensitivity.
  • Page 6: Input Switch

    Automatic power saving (APS) function This unit will enter sleep mode automatically under the following circumstances. ● When 30 minutes pass without audio input. ● When 30 minutes pass without headphones being plugged into the PHONES jack. CAUTION To end sleep mode, turn the volume knob counterclockwise until the unit is turned off.
  • Page 7: Supported Operating Systems

    Turn this unit's power/volume knob to adjust the volume. Download the latest firmware The latest firmware is disclosed on the Onkyo website. Troubleshooting If you experience a problem with this unit, please check the following items before requesting service. If it still does not operate correctly, contact the retailer where you purchased the unit.
  • Page 8: Specifications

    Specifications Frequency response .....10 Hz–100 kHz (when using AUDIO IN) Distortion ....... 0.003% or less (when using AUDIO IN) (32 Ω, 1 kHz, 85 mW + 85 mW output, JEITA) Supported headphone impedance .

Table of Contents