Enrolling Smart Cards - Red Hat CERTIFICATE SYSTEM ENTERPRISE - SECURITY GUIDE Manual

The View Certificates button shows basic information about the selected smart card, including
the keys and certificates stored on it.
1. Place a supported smart card into the USB slot of the computer. Make sure the card shows
up in the Active Smart Cards table.
2. Select the card from the list.
3. Press the View Certificates button.
4. Basic information about the certificates stored on the card is shown, including the serial
number, certificate nickname, and validity dates. More detailed information about the
certificate can be viewed by selecting a certificate from the list, and clicking View.
Figure 4.8. Viewing Certificates

6.4. Enrolling Smart Cards

Although most smart cards will be enrolled using the automated enrollment, described in
Section 4, "Smart Card Auto
through the Manage Smart Cards page.
Enrollment", there is an alternative way of enrolling smart cards
Enrolling Smart Cards
35