Jeco CH-CT90 Assembly Instructions

Important:
Please read all the instructions and warnings before assembling.
Before you start to assemble your tree,choose a location near a wall outlet.Make sure the tree stand is placed on a
level surface.
Fig.A-Tree and Light Assembly
Section C
Yellow Label
1. Each tree section is numbered with a tag named A,B and C. Please identify all sections before assembling.
2. Please remove protective cap and assemble the tree from the bottom to the top. Start with the bottom section
and insert it into metal stand.Make sure the pole is firmly inserted and secured into the stand.
3. Please continue inserting the middle section(s) into the bottom section until the tree top is inserted.
4. (For pre-lit trees only) Connect the light strings as per the color labels indicated in Fig. A and insert
plug into the wall outlet. Your entire tree should now be lit. If some bulbs do not light or flickers, search
for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the
performance and life expectancy of your pre-lit tree.
5. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole
and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. B)
Fig. B
Top view
6. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look.
Shift branches to fill any gaps. Your Christmas tree is no w complete and ready to be decorated.
Thanks for shopping with Jeco
6FT Pre-Lit Green Flocked Tree W/ LED Lights
Assembly Instructions
Section A
Section B
Side view
®
SKU# CH-CT90
*Electrical Rating For The Tree
(For Indoor Use)
0.072A 120V 60Hz
Assemble
Yellow Label
1
Assemble
Yellow Label
Insert
Plug Into Wall
Outlet