Jeco CH-CT95 Assembly Instructions

4.5FT Pre-Lit White Flocked Tree With MgO Pot
Important:
Please read all the instructions and warnings before assembling.
Before you start to assemble your tree,choose a location near a wall outlet.Make sure the tree urn is placed on a
level surface.
Fig.A-Tree and Light Assembly
Yellow Label
1. Each tree section is numbered with a tag named A,B. Please identify all sections before assembling.
2. Please remove protective cap and assemble the tree from the bottom to the top. Start with the bottom section
and insert it into MGO urn .Make sure the pole is firmly inserted and secured into the MGO urn.
3. Please continue inserting the top section into the bottom section.
4. (For pre-lit trees only) Connect the light strings as per the color labels indicated in Fig. A and insert
plug into the wall outlet. Your entire tree should now be lit.
5. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole
and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. B)
Fig. B
Top view
6. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look.
Shift branches to fill any gaps. Your Christmas tree is no w complete and ready to be decorated.
Thanks for shopping with Jeco
Assembly Instructions
SKU# CH-CT95
Section A
Section B
Side view
®
*Electrical Rating For The Tree
(For Indoor Use)
0.20A 120V 60Hz
Assemble
Yellow Label
1
Insert
Plug Into Wall
Outlet