14. ENVIRONMENTAL CONCERNS................25 DEAR CUSTOMER Thank you for choosing this Husqvarna-Electrolux product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
(average) domestic usage levels. Do not change the specification of this appliance. • The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 13 place settings.
ENGLISH • Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. •...
ENGLISH The graphic is a general overview. For more details, refer to other chapters or documents provided with the appliance. 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Salt indicator.
Indicator Description Delay indicator. It is on when you set the delay start. GlassCare indicator. ExtraPower indicator. ExtraHygiene indicator. 5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme...
Water (l) Energy (kWh) Duration (min) 1)2) Programme 0.010 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
ENGLISH How to activate ExtraHygiene The display shows the updated programme duration. Press Option until the indicator is on. 7. SETTINGS 7.1 Programme selection How to enter user mode mode and user mode Make sure the appliance is in programme selection mode. When the appliance is in programme selection mode it is possible to set a To enter user mode, press and hold...
ENGLISH • The indicator still All the consumption values flashes. mentioned in this section are • The remaining indicators are off. determined in line with the • The display shows the current currently applicable standard setting. in laboratory conditions with water hardness 2.5mmol/L –...
• The indicator still flashes. CAUTION! • The remaining indicators are off. If children have access to • The display shows the current the appliance, we advise to setting: deactivate AirDry. The automatic opening of the – = AirDry is deactivated.
ENGLISH 8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Fill the dispenser (A) until the rinse aid reaches the marking ''MAX''. 3.
9.2 Setting and starting a the energy consumption and the programme duration. After closing the programme door, the appliance continues from the point of interruption. The Auto off function If the door is opened for This function decreases energy...
ENGLISH 10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment. designed for dishwasher.
4. When the programme is complete, • Make sure that the spray arms can adjust the water softener according move freely before you start a to the water hardness in your area. programme. 5. Adjust the released quantity of rinse 10.5 Before starting a...
ENGLISH programmes at least twice a month to prevent the buildup. 11.2 Removal of foreign objects Check the filters and the sump after each use of the dishwasher. Foreign objects (e.g. pieces of glass, plastic, bones or toothpicks, etc) decrease the cleaning performance and can cause damage to the drain pump.
2. Wash the spray arm under running 7. Reassemble the filters (B) and (C). water. Use a thin pointed tool, e.g. a 8. Put back the filter (B) in the flat filter toothpick, to remove particles of soil (A). Turn it clockwise until it locks.
ENGLISH 12. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code.
Page 22
Problem and alarm code Possible cause and solution The temperature of the wa‐ • Make sure that the temperature of the inlet water does ter inside the appliance is not exceed 60°C. too high or malfunction of • Switch the appliance off and on.
Page 23
ENGLISH Problem and alarm code Possible cause and solution The appliance trips the cir‐ • The amperage is insufficient to supply simultaneously all cuit-beaker. the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the applian‐ ces in use.
Page 24
Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad‐ drops on glasses and dishes. just the rinse aid dosage to a higher level. • The quality of the rinse aid can be the cause.
ENGLISH Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 597 / 818 - 878 / 576 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min.
Need help?
Do you have a question about the QB6054W and is the answer not in the manual?
Questions and answers