14. ENVIRONMENTAL CONCERNS................29 DEAR CUSTOMER Thank you for choosing this Husqvarna-Electrolux product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
(average) domestic usage levels. Do not change the specification of this appliance. • The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 14 place settings.
ENGLISH • Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. •...
Please note that some of these spare information about the operational parts are only available to status of the appliance. They are not professional repairers, and that not all...
Ceiling spray arm Detergent dispenser Upper spray arm Lower basket Lower spray arm Upper basket Filters Cutlery drawer Rating plate The graphic is a general overview. For more details, Salt container refer to other chapters or Air vent documents provided with the Rinse aid dispenser appliance.
ENGLISH 5.1 Display 5.2 ECOMETER The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is. indicates the most environmentally friendly programme A. ECOMETER selection for a normally soiled B.
6.2 AUTO Sense programme. The option increases the wash temperature and duration. The AUTO Sense programme automatically adjusts the dishwashing GlassCare cycle to the type of load. GlassCare prevents delicate load, The appliance senses the degree of soil glassware in particular, from damaging.
7. BASIC SETTINGS You can configure the appliance by changing basic settings according to your needs. Number Settings Values Description Water hardness 1L - 10L (de‐ Adjust the level of the water softener ac‐ fault: 5L) cording to the water hardness in your area.
ENGLISH The lights related to the Previous, OK 5. Press and hold simultaneously and Next are on. for about 3 seconds to exit setting mode. How to change a setting The appliance returns to the programme selection. Make sure the appliance is in setting The saved settings remain valid until you mode.
Page 14
Multi-tabs containing salt are programme by additional 2 Wh. The not effective enough to rinsing of the softener ends with a soften hard water. complete drain. Regeneration process Each performed softener rinse (possible...
ENGLISH Acoustic signals sound also CAUTION! when a malfunction of the If children have access to appliance occurs. It is not the appliance, we advise to possible to deactivate these deactivate AirDry. The signals. automatic opening of the door may pose a danger. 7.5 AirDry When AirDry opens the AirDry improves the drying results.
8.1 The salt container 8.2 How to fill the rinse aid dispenser CAUTION! Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use.
ENGLISH 9. DAILY USE 9.2 How to select and start a 1. Open the water tap. programme using MY TIME 2. Press and hold until the appliance is activated. selection bar 3. Fill the salt container if it is empty. 1.
9.4 How to start the AUTO The appliance returns to the programme selection. Sense program Make sure that there is 1. Press detergent in the detergent • The light related to the button is dispenser before you start a new programme.
ENGLISH 10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment. designed for dishwasher.
4. When the programme is completed, ornamented porcelain and adjust the water softener according unprotected carbon steel. This can to the water hardness in your area. cause them to crack, warp, discolour, 5. Adjust the released quantity of rinse pit or rust.
ENGLISH 11.5 Cleaning the filters 2. Press and hold simultaneously for about 3 seconds. The filter system is made of 3 parts. The indicators flash. The display shows the programme duration. 3. Close the appliance door to start the programme. When the programme is complete, the indicator is off.
11.6 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards. 5. Make sure that there are no residues of food or soil in or around the edge of the sump.
ENGLISH 11.7 Cleaning the upper 2. Move the upper basket to the lowest level to reach the spray arm more spray arm easily. 3. To detach the spray arm (C) from the Do not remove the upper spray arm. If delivery tube (A), turn the mounting the openings in the spray arm are element (B) counterclockwise and...
12. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code.
Page 25
ENGLISH Problem and alarm code Possible cause and solution The temperature of the wa‐ • Make sure that the temperature of the inlet water does ter inside the appliance is not exceed 60°C. too high or malfunction of • Switch the appliance off and on. the temperature sensor oc‐...
Page 26
Problem and alarm code Possible cause and solution The appliance trips the cir‐ • The amperage is insufficient to supply simultaneously all cuit-beaker. the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the applian‐...
Page 27
ENGLISH Problem Possible cause and solution Poor drying results. • Tableware was left for too long inside the closed appli‐ ance. Activate the function AirDry to set the automatic opening of the door and to improve the drying perform‐ ance. •...
Problem Possible cause and solution Limescale deposits on the ta‐ • The level of salt is low, check the refill indicator. bleware, on the tub and on the • The cap of the salt container is loose. inside of the door.
ENGLISH It is possible to find information related to For more detailed information about the the performance of the product in the EU energy label, visit EPREL database using the link https:// www.theenergylabel.eu. eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance.
Need help?
Do you have a question about the QB6147I and is the answer not in the manual?
Questions and answers