Related Manuals for ACutter A200MS
Summary of Contents for ACutter A200MS
- Page 1 A200MS Fiber Laser Cutting Head User’s Manual Version V1.0 WUHAN AU3TECH TRADING CO., LTD Tel: 027-82726630 Daijiashan Technology Park,No. www.au3tech.com Fax: 027-82726630 888 Hanhuang Road. info@au3tech.com...
-
Page 2: Table Of Contents
RODUCT HIGHLIGHTS ................................3 TRUCTURE PRODUCT CONFIGURATION ......................5 ............................5 ECHNICAL PARAMETERS ............................... 5 ONFIGURATION LIST A200MS .................. 6 HE APPEARANCE OF FIBER LASER CUTTING HEAD INSTALLATION OF MECHANICAL PARTS ..................7 ..........................7 NSTALLATION OF MAIN PARTS ........................8 NSTALLATION OF ATER COOLING .......................... -
Page 3: Abstract
Key points This user’s manual contains basic installation, factory settings, operation, maintenance instructions and other descriptions of A200MS fiber laser cutting head. Since mechanical parts are too many, this manual will only introduce the main units. A200MS fiber laser cutting head, German brand A-cutter series, is designed for laser power within 2000w, which is a wonderful solution for medium power of laser flat cutting. -
Page 4: Introduction
A200MS fiber laser cutting head was designed for flat cutting within 2000w by German brand A- cutter in 2018. With optical lens group in D30 and multi interfaces design, A200MS fiber laser cutting head can be matched with different types of fiber laser sources. It’s much more stable during longtime working in high laser power with its optimized optical system and water cooling system. - Page 5 Figure 1. The structure of A200MS fiber laser cutting head. ⚫ Fiber socket: Connect with fiber laser source. ⚫ Collimate unit: turn the incident laser beam into parallel beam，which can be adjust for centering the laser beam. ⚫ Focus unit: turn the parallel beam into gathered beam with high energy, and adjust the focus position in real time by regulating the focus unit.
-
Page 6: Product Configuration
Product configuration A200MS fiber laser cutting head was designed for flat cutting within 2000w, its standard configuration is: A200MS-Z100-F125. Technical parameters Parameters Value Max Power 2000W Fiber Socket Focus Lens Dia=30mm，F=125mm Collimate Lens Dia=30mm，F=100mm 26mm Laser Wavelength 1064nm ≤2.5kg Head Weight... -
Page 7: The Appearance Of A200Ms Fiber Laser Cutting Head
The appearance of A200MS fiber laser cutting head Figure 2. The appearance of A200MS fiber laser cutting head. 6 / 20... -
Page 8: Installation Of Mechanical Parts
Installation of mechanical parts Installation of main parts The size of installation hole of A200MS showed as figure 3. Please make sure the fiber laser cutting head is perpendicular to the metal sheet when installing and at the same time to make sure the cutting head has been locked stably on the cutting machine for getting a stable cutting quality. -
Page 9: Installation Of Water Cooling
Figure 4. The interface of water cooling of A200MS fiber laser cutting head Parameters... - Page 10 A200MS fiber laser cutting head has 1 cutting gas circuit, the outside diameter of gas pipe is 10mm. (Figure 5) Figure 5. The interface of cutting gas of A200MS fiber laser cutting head. Type of gas Purity 99.95% 99.99%...
-
Page 11: Fiber Socket
Fiber socket A200MS fiber laser cutting head can be matched with multi types of industrial laser source, it has collimate unit. The connected part between the end of optical fiber and cutting head was called QBH connector. The standard fiber socket of A200MS fiber laser cutting head is QBH connector. (Figure 6) Figure 6. - Page 12 Figure 7. The insertion and locking of QBH fiber. 11 / 20...
-
Page 13: The Centering And Adjustment Of Laser Beam
Figure 8. The centering of laser beam of A200MS fiber laser cutting head. The centering of A200MS fiber laser cutting head can be done by adjusting the X-Y direction of collimate lens. Collimator Unit X/Y Adjustment showed as Figure 8. The adjustment can be done by using hexagonal screw driver until the laser beam is in the center of nozzle tips. -
Page 14: Focus Adjustment
This is the basic method to find the best center position of laser beam. Focus adjustment Figure 9 is the focus adjustment unit of A200MS fiber laser cutting head. Rotate the focus adjustment unit in clockwise, the focus will go up in plus direction (Max: +6mm), opposite in anticlockwise (Max: -6mm). -
Page 15: Care And Maintenance
Care and maintenance Optical lens cleaning; A200MS fiber laser cutting head has 2 types of protective windows: the one in the top is protective windows of collimate lens, the other one at the bottom is protective windows of focus lens. When there... -
Page 16: Disassembly And Installation Of Optical Lens
■Tools for cleaning optical lens： Dust free gloves or fingerstall, cotton swab in polyester fiber, absolute ethyl alcohol, air blowing device in rubber (clean compressed air) etc. ■ Optical lens cleaning method and Notes: (1) Please put on the fingerstall in the thumb and index finger of your left hand; (2) Spray some absolute ethyl alcohol on the cotton swab;... - Page 17 (5) Put screw ring back into the cover slide drawer; (6) Put the protective windows unit back into the cutting head and then tighten the two screws. Figure 11. Protective windows of collimate lens. PS: There is a seal ring inside the cover slide drawer (under the lens), please don’t lose it when you clean or change the protective windows.
- Page 18 Figure 12. Protective windows of focus lens. ■ Disassembly and installation of collimate lens: (1) Disassembly the cutting head and clean up all the dust on the surface of the head in a clean place; (2) Loosen all the screws of the collimate lens unit showed in figure 13 by hexagonal screw driver in 3mm, and kindly suggest you use masking tape to cover the part connecting with collimate lens for...
-
Page 19: Replacement Of Capacitive Nozzle Body
■ Disassembly and installation of focus lens: (1) Disassembly the cutting head and clean up all the dust on the surface of the head in a clean place; (2) Loosen all the screws of the focus lens unit showed in figure 14 by hexagonal screw driver in 4mm, and kindly suggest you use masking tape to cover the part connecting with focus lens for... - Page 20 (2) Screw on a new nozzle tips and tighten it with proper strength; (3) Head calibration must be done again after the replacement of nozzle tips or ceramic rings. Figure 15. Ceramic rings and nozzle tips of A200MS fiber laser cutting head. 19 / 20...
-
Page 21: Collimate Lens Unit And Focus Lens Unit Of A200Ms Fiber Laser Cutting Head
Collimate lens unit and focus lens unit of A200MS fiber laser cutting head. Figure 16. Collimate and focus lens’ assembly process of A200MS Cutting head. 20 / 20...
Need help?
Do you have a question about the A200MS and is the answer not in the manual?
Questions and answers