Network Override Set-Up; Thermostat Button Lockout - AMX VIEWSTAT COMMUNICATING THERMOSTATS Instruction Manual

Set Up and Configuration
The following items are configured in thermostat set-up:

Network Override Set-Up

This enables or disables the Network Override feature. When Network Override has been invoked
the thermostat will only respond to the buttons of the thermostat; commands sent by the automation
system are ignored.
Pressing the Enter button activates Network Override. However, you can disable this feature if you
don't want users to be able to activate Network Override. Enabling and Disabling of this feature is
done through Thermostat Set-Up (FIG. 33).
Network Override
Set Up
FIG. 33 Network Override set-up

Thermostat Button Lockout

This feature partially or completely disables the buttons of the thermostat. For example, the MODE
and FAN status can be set and then locked, so the buttons will not allow those settings to be
changed. Additionally, this can be set to allow changes for a limited time and amount of change.
For example, you can limit temperature changes to ±3°, if desired (FIG. 34).
Thermostat
Lockout
FIG. 34 Thermostat Button Lockout
46
Enable Network
Next
Override Next
Disable Network
Override Back
Complete
More
Lockout Next
Partial
Lockout More
Unlock
Thermostat More
EXIT
Back
Net.Ovrd.Enabled
EXIT
Net.Ovrd.Disable
EXIT
SetPoints, Fan &
Mode Locked Out
Set Time Limit
Set Temp. Limit
+ -
Allow SetPoint
Changes?
Time
Allow Fan
Changes?
Allow Mode
Changes?
EXIT
ViewStat Communicating Thermostat
MAIN MENU
MAIN MENU
min.
Timed
+ -
Val
Yes
No
Yes
Timed
No
Yes
Timed
No
Back