Related Manuals for Toro 22340
Summary of Contents for Toro 22340
- Page 1 Form No. 3398-465 Rev A Standard Bucket Compact Utility Loaders Model No. 22340—Serial No. 315000001 and Up *3398-465* A Register at www.Toro.com. Original Instructions (EN)
-
Page 2: Table Of Contents
You are responsible for operating the product properly and safely. You may contact Toro directly at www.Toro.com for product safety and operation training materials, accessory information, help finding a dealer, or to register your product. -
Page 3: Power, Gas, And/Or Telephone Lines May Be Buried
• Never attempt to make any adjustments while the engine is running, except when specifically recommended by WARNING Toro. If you step off the platform with the load raised, the • The operation of any powered machine can result in machine could tip forward. -
Page 4: Maintenance And Storage
Front Uphill necessary. Toro Safety Rear Uphill The following list contains safety information specific to Toro products or other safety information that you must know that is not included in the ANSI or ISO standards. • Stay in the operator’s position while operating the attachment. -
Page 5: Safety And Instructional Decals
Safety and Instructional Operation Decals Note: Always use the traction unit to lift and move the Safety decals and instructions are easily attachment. visible to the operator and are located near Important: Before installing the bucket, ensure that the any area of potential danger. Replace any mount plates are free of any dirt or debris and that the decal that is damaged or lost. -
Page 6: Maximum Material Density At Capacity
Maximum Material Density at Material Density Capacity Material Density (Approximate) Caliche 1250 kg/m (78 lb/ft The density of the materials moved by the bucket varies and, Clay: therefore, so does the amount of material that the bucket 1600 kg/m (104 lb/ft Natural bed can carry before reaching the maximum load rating. -
Page 7: Storage
Storage 1. Before long-term storage, wash the attachment with mild detergent and water to remove dirt and grime. 2. Paint all scratched or bare metal surfaces. Note: Paint is available from your Authorized Service Dealer. 3. Store the attachment in a clean, dry garage or storage area. - Page 8 Toro importer. If all other remedies fail, you may contact us at Toro Warranty Company. Australian Consumer Law: Australian customers will find details relating to the Australian Consumer Law either inside the box or at your local Toro Dealer.
Need help?
Do you have a question about the 22340 and is the answer not in the manual?
Questions and answers