Download Print this page

Campania Aya FT-181 Assembly Instructions

Advertisement

Quick Links

Fountain Components
Image
Item Description
Aya Fountain -
Water Feature
Aya Fountain -
Basin
Fountain Information:
• This fountain holds approximately 4 gallons of water.
• This fountain uses a small fountain cover: FTNCOV-SM
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Scissors
Component
Quantity
Item #
FT-181A
1
FT-181B
1
SHOP NOW
FT-181 Aya Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK120-LV Pump with transformer
#7 Stopper
2" length of Perma Gum putty
Approx. 6" length of 1/2" black
non-kink tubing
Approx. 1" length of 5/8" clear tubing
1" length of 1/2" CPVC pipe
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
1
1
Wedges
2
1
rev 02/22/2024

Advertisement

loading
Need help?

Need help?

Do you have a question about the Aya FT-181 and is the answer not in the manual?

Questions and answers

Summary of Contents for Campania Aya FT-181

  • Page 1 FT-181 Aya Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 4 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or submersible lights are suggested for this fountain. Pump Information: WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length) Tools Required: Bubble Level Screwdriver...
  • Page 2 FT-181 Aya Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
  • Page 3 FT-181 Aya Fountain Assembly Instructions Step 7 - Insert the CPVC end of the tubing into the bottom of the water feature (FT-181A). Step 8 - Place the water feature into the basin ensuring that it is level. 8a - Turn the feature and coil the tubing as you lower it into position. FT-181A (8 lbs) 10"W x 6.5"H SHOP NOW...
  • Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - Ensure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.