M domus L domus XL Indoor use only FLOOR REQUIREMENTS FOR DOMUS BOOTH INSTALLATION Ensure the floor has sufficient strength and stability to support the booth’s weight concentrated at the support points (wheels or stoppers). domus S domus M...
Maintain clearance around the booth (sides and ceiling) for proper ventilation. Ensure sufficient space for proper door opening (outward opening). Allow enough space to access the perimeter of the DOMUS booth (leveling stoppers, maintenance mobility). To maintain a comfortable interior temperature, avoid placing DOMUS booths directly under heating or air conditioning units.
INSTALLATION AND SETUP Assemble the booth according to the assembly instructions. Refer to the assembly manual for personnel requirements per model. Step 1 Position the assembled booth in the desired location (booths are equipped with wheels for repositioning within the office). Step 2 Fix the booth in place by unscrewing the stoppers attached to the wheels until they are immobilized.
Page 5
VENTILATION REGULATOR Turn the ventilation control knob counterclockwise to close the air circulation (OFF). Turn the knob clockwise to activate air circulation (ON) with adjustable intensity from Maximum (just after the OFF position) to Minimum (fully clockwise). Turn the ventilation adjustment wheel counterclockwise until you hear a small “click”...
Comfort Recommendation: Keep the switch ON for automatic lighting during frequent use periods. Turn the switch OFF during extended non-use periods (overnight, weekends, etc.). domus M, L, XL LIGHTING OPERATION The ceiling has multiple recessed LED work lights (A) activated by the left switch in the interior connector panel.
Page 7
The handle allows the booth to be locked with a key from the outside. How to use the key lock: Step 1 Insert the key into the slot in the DOMUS cabin. Step 2 Turn the key 90° clockwise. Step 3 DOMUS cabin closed.
TECHNICAL DATA Do not install high-power devices such as heaters or vacuum cleaners inside the DOMUS booths. Maximum power consumption: For 220V installations: 2200W total. For 110V installations: 1600W total CLEANING AND MAINTENANCE Disconnect from power before performing maintenance or wet cleaning.
Need help?
Do you have a question about the domus and is the answer not in the manual?
Questions and answers