Komatsu PC130-8 Brochure page 4

PC130
H
-8 Y D R A U L I C
W E
ORKING NVIRONMENT
Low Cab Noise Wide Newly-designed Cab
The newly-designed cab is highly rigid Newly-designed wide spacious cab
and has excellent sound absorption includes seat with reclining backrest.
ability. Thorough improvement of noise The seat height and longitudinal incli-
source reduction and use of low noise nation are easily adjusted using a pull-
engine, hydraulic equipment, and air up lever. You can set the appropriate
conditioner allows this machine to gen- operational posture of armrest together
erate a low level of noise similar to with the console.
that of a passenger car. Reclining the seat further enables you
to place it into the fully flat state with
the headrest attached.
Low Vibration with Cab Damper
Mounting
PC130-8 uses viscous damper mount-
ing for cab that incorporates longer
stroke and the addition of a spring. The
new cab damper mounting combined
with high rigidity deck aids vibration
reduction at operator seat.
Rubber
Pressurized Cab
Spring
Air conditioner, air filter and a higher
Silicon
Oil
internal air pressure (+6.0 mm Aq
+0.2"Aq) prevent external dust from
entering the cab.
6
E
X C A V A T O R
Automatic Air Conditioner
Enables you
to easily and
precisely set
cab atmos-
phere with
the instru-
ments on the large LCD.
The bi-level control function keeps the
operator's head and feet cool and
warm respectively. This improved air
flow function keeps the inside of the
cab comfortable throughout the year.
Defroster function keeps front glass
clear.
HYDRAULIC EXCAVATOR
Safety Features
Cab Dedicated to Hydraulic Excavator
The cab is designed specifically for hydraulic excavators and
gains reinforced strength from the pipe-structured cab frame-
work. The cab framework provides the high durability and
impact resistance with very high impact absorbency. The
seat belt keeps the operator in the seat of the cab during a
roll over.
Anti-slip Plates
Highly durable anti-
slip plates maintain
superior traction
performance for the
long term.
Pump/engine Room Partition
Pump/engine room partition prevents oil from spraying onto
the engine if a hydraulic hose should burst.
PC130
Lock Lever
Locks the hydraulic
pressure to prevent
unintentional move-
ment. Neutral start
function allows
machine to be started
only in lock position.
Large Side-view, Sidewise, Rear and Front Under-
view Mirrors
Enlarged side mirrors and addition of front under mirror allow
the PC130-8 to meet the new ISO visibility requirements.
Rear View Monitoring System (optional)
The operator can view the rear of the machine with a color
monitor screen.
Monitor for rear view camera
Thermal and Fan Guards
Thermal and fan guards are
placed around high-tempera-
ture parts of the engine and
fan drive.
-8
7